https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/124075.aspxWed, 18 Jun 2008 05:47:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124075tournedos0https://archivedforum.beoworld.org:443/forums/thread/124075.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=124075<p>No problem at all - but check the impedance ratings first, your speakers might be 4 ohm (should read on the back in the type label) and your amp might want at least 8 ohms. I&#39;d expect it to accept anything between 4-16 ohms, though.</p><p>If the speakers have captive leads and the DIN connectors are still there, you&#39;ll have to decide if you want to cut them off, or purchace / build adapter cables. The amp most probably has screw connectors. The original DINs would be handy, though, once you get a nice vintage B&amp;O receiver to replace the Pioneer <img src="http://forum.beoworld.org/emoticons/02.gif" alt="Big Smile" /><br /></p><p>And welcome to Beoworld! </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/124073.aspxWed, 18 Jun 2008 05:26:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124073trampsterdave0https://archivedforum.beoworld.org:443/forums/thread/124073.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=124073<p>Hi...Just wondering if anyone knows if it&#39;s a straightforward process to use my Beovox speakers [vintage early 70s] with a Pioneer amp/receiver of similar vintage?&nbsp; [I&#39;m hoping so....!]</p><p>Thanks, trampsterdave&nbsp;</p><div style="clear:both;"></div>