https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/111453.aspxFri, 02 May 2008 04:31:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:111453Dillen0https://archivedforum.beoworld.org:443/forums/thread/111453.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=111453<p>I can supply the belt.&nbsp; You have a PM !</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/111451.aspxFri, 02 May 2008 04:23:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:111451patr5120https://archivedforum.beoworld.org:443/forums/thread/111451.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=111451Is that the smallest of the three, I was told it was for a counter that was not needed and BO could not provide one so it is not fitted, where can I get on from? Thanks for the info. Pat<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/111224.aspxThu, 01 May 2008 07:38:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:111224Dillen0https://archivedforum.beoworld.org:443/forums/thread/111224.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=111224<p>Welcome to Beoworld !&nbsp;</p><p>Did you replace all three belts ?</p><p>It sounds as if the belt for the motion sensor is bad or not in.</p><p>The balance and tone controls are not touch sensitive. They are sliders found under the large top&nbsp;cover. Press the word &quot;Programming&quot; on the extreme left side of the front&nbsp;rail and the lid springs up.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/111215.aspxThu, 01 May 2008 06:43:17 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:111215patr5120https://archivedforum.beoworld.org:443/forums/thread/111215.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=111215<p>I have just inherited a Band O sound set up . It has hadly been used and dates back to the 1980,s&nbsp; Th beocord 200 cassette player did not work so I have stripped it and replaced the belts. Unfortunately when you press play , forward or reverse , the solenoid clicks in and the clicks straight out again. </p><p>On the Beogram amplifyer and tuner the touch sensitive balance and tone adjusters do not seem to operate. Any advice gratefully received. Pat</p><div style="clear:both;"></div>