https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/83183.aspxMon, 28 Jan 2008 16:20:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:83183auric0https://archivedforum.beoworld.org:443/forums/thread/83183.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=83183<p>Assuming the seller does not have the original packaging, extra care will be necessary to package&nbsp; your turntable.&nbsp;</p><p>&nbsp;- Make sure that you instruct the seller to lock down the transport (3 screws on the bottom).</p><p>- Remove aluminum platter (+ sub platter), wrap separately&nbsp;with bubble wrap and card board to avoid, dings, scratches, nics.</p><p>- Tape down all aluminum surfaces especially side panel under tone arm.</p><p>- Tape down wood trim to chasis.</p><p>- Remove Stylus and package separately with guard.</p><p>- Put a foam block between and underneat tone arm and tape down.</p><p>- Coil power cord and wrap the end of the plug so that the prongs are not exposed. (If left loose it could move around and scratch the deck up)</p><p>- Tape down&nbsp;dust cover.</p><p>- Double box the item with lots of pop corn and bubble wrap.</p><p>Derek</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/82992.aspxMon, 28 Jan 2008 05:23:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:82992tournedos0https://archivedforum.beoworld.org:443/forums/thread/82992.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=82992<p>I think I&#39;ve found myself a Beogram 4002 from abroad. In case the seller hasn&#39;t done this before, is there any specific advice on how to pack this thing so I won&#39;t receive a box full of shreds?</p><p>-mika</p><p>&nbsp;</p><div style="clear:both;"></div>