BeoGram

Re: Beogram 1200

kevinoils — Mon, 03 Dec 2007 09:34:57 GMT

Hi there are you going to retore the beogram 1200s as I have 1200 and 1202, I am aiming to get them back to as good as as soon as I have the chance and knowledge so this post could be useful.

Thanks

Kev

Re: Beogram 1200

bwaje — Mon, 03 Dec 2007 07:51:45 GMT

Thanks Martin, it was easy, but the center tap is very fragile, and can bend on mounting

Re: Beogram 1200

Dillen — Thu, 29 Nov 2007 13:00:46 GMT

To dismount the platter;
Push up the center tap, grab it and pull straight up (there's a spring underneath).
This will reveal three screws, undo these and the platter is lose.

The round belt is the correct one.

Martin

Re: Beogram 1200

bwaje — Thu, 29 Nov 2007 12:29:05 GMT

so, anyone knowing about removing the platter please ?

Re: Beogram 1200

bwaje — Sat, 24 Nov 2007 11:25:47 GMT

In the end, I'm almost certain that the good belt is the round one, but I need to change it to my 2nd beogram, do you know how to do it ?

How do I remove the platter ?

Re: Beogram 1200

9 LEE — Fri, 23 Nov 2007 18:04:40 GMT

Martin (Dillen) is probably the man to speak to here!

I'm sure he wouldn't mind if you sent him a PM !

Lee

PS - Welcome to BeoWorld !

Beogram 1200

bwaje — Thu, 22 Nov 2007 08:30:06 GMT

Hello,

this is my first post here, as I am a new b&o owner ; however, I have used my parents' beovision 1001 since 1974;

I recently bought two beogram 1200 turntables (one doesn't switch on) and discovered that they have different belts ...!

One has a round belt and the second is a flat and used; so what is the good one ?

And is there a fuse preventing the turntable to be switched on ?

Thanks

bwaje