https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/55876.aspxTue, 16 Oct 2007 14:07:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:55876Dillen0https://archivedforum.beoworld.org:443/forums/thread/55876.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=55876<p>There are three screws at the leaf springs to adjust the deck height.</p><p>There&#39;s a small fee but it may be worth getting the service manual from our download section, it will tell you exactly how&nbsp;to do it correctly.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/55870.aspxTue, 16 Oct 2007 13:51:45 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:55870Andy 0https://archivedforum.beoworld.org:443/forums/thread/55870.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=55870Hi I have beogram that was given to me it all works well but it appears that the platter catches or scrapes as it turns. All the transport screws have been released. The sub platter and belt were removed during transport but fit back in well.<div><br class="khtml-block-placeholder" /></div><div>Is there anything I should check? Its not a continuous scrape or catch just once in a revolution. The platter does look slightly proud of the unit.</div><div><br class="khtml-block-placeholder" /></div><div>Thanks in anticipation of some advice.</div><div><br class="khtml-block-placeholder" /></div><div>Andy</div><div style="clear:both;"></div>