https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/360631.aspxMon, 27 Feb 2012 12:25:00 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360631Jeff0https://archivedforum.beoworld.org:443/forums/thread/360631.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=360631<p>I think you&#39;d mess the weight calibration up less than you&#39;d change the vertical tracking angle of the cartridge as the record height is higher. How much that would change things depends&nbsp;a lot on the cartridge, I expect the nude contact line would find it a bigger change than the eliptical stylus. Whatever you try should be very thin. </p> <p>ONe issue with cleaning a disc on the platter is you also tend to push the suspension down too much in my experience. It takes a very light hand with a brush to make it work at all. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/360544.aspxSun, 26 Feb 2012 18:46:07 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360544Benjamindaines0https://archivedforum.beoworld.org:443/forums/thread/360544.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=360544<p>I&#39;m having an issue with some records where they&#39;ll slip on the platter, especially while cleaning or spinning up.&nbsp; Would I be able to get a pad for the platter (like some other brands have) without messing up the weight calibration for the tone arm / cartridge? </p><div style="clear:both;"></div>