https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/360638.aspxMon, 27 Feb 2012 13:10:20 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360638onrampsrv0https://archivedforum.beoworld.org:443/forums/thread/360638.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=360638<p>I&#39;m working on refurbishing an 8002 and have the same problem.&nbsp; Waiting to get a cap&nbsp;kit from Martin and hope this will solve these problems.&nbsp; How many caps did you replace?&nbsp; I have already reworked almost all of the PCB connection.&nbsp; I just finished a CD50 yesterday.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/359258.aspxSat, 18 Feb 2012 12:09:08 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:359258Andy 0https://archivedforum.beoworld.org:443/forums/thread/359258.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=359258<p>Hi</p> <p>ive used Martins great kit and replaced all the caps as per instructions. The only issue now appears on cueing the arm. Pressing play moves the arm to the correct position but it wont lower. It lowers if you move it on manually a few mm withe the &lt;&lt; key and works perfectly??</p> <p>Any ideas?</p> <p>&nbsp;</p> <p>Thanks</p> <p>&nbsp;</p> <p>Andy</p> <p>&nbsp;</p> <p>&nbsp;</p><div style="clear:both;"></div>