https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/349958.aspxSun, 11 Dec 2011 09:25:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:349958joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/349958.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=349958<p>Possibly the servo drive band has come off or has broken or</p> <p>possibly the servo bulb/light sensitive resistor in the arm carriage defective or</p> <p>possibly fault on the main board.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/349948.aspxSun, 11 Dec 2011 08:42:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:349948Neo10780https://archivedforum.beoworld.org:443/forums/thread/349948.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=349948<p>Hi all.</p> <p>&nbsp;</p> <p>I have recently purchased a beogram 5005. &nbsp;Case, cartridge all lovely. &nbsp;I just have one issue. &nbsp;The stylus arm will not track with the record. &nbsp;It simplly sits in one place. &nbsp;It moves normally with the lift and turn buttons. &nbsp;Sliding smoothly from end to end of its track. &nbsp;When playing it will not move. &nbsp;The arm merely pivots in its holder until it can pivot no more then skips. &nbsp;Any ideas? &nbsp;It was working perfectly when I got the deck about 4 weeks ago.</p> <p>And advice would be most welcome.</p> <p>Thanks</p><div style="clear:both;"></div>