BeoGram

Re: Help with 1800

hwystar — Thu, 08 Dec 2011 06:43:46 GMT

Thanks for all your help.

Re: Help with 1800

hwystar — Thu, 08 Dec 2011 06:42:53 GMT

Søren Mexico:

Adjust the platter hight like this, if you sign up as silver member you can download the whole manual.

hmmm, That's interesting.

Re: Help with 1800

Søren Mexico — Thu, 08 Dec 2011 00:08:24 GMT

Adjust the platter hight like this, if you sign up as silver member you can download the whole manual.

Re: Help with 1800

hwystar — Wed, 07 Dec 2011 23:46:09 GMT

The screws are loose and the platter along with the whole bottom moves up and down but seemms it is sitting too low.

Re: Help with 1800

Søren Mexico — Tue, 06 Dec 2011 20:32:45 GMT

Under the platter positioned where you see the 3 brass nuts on the pic you will find the transport scews, check if they are loosened and the platter mooves freely up and down, press the platter down with your finger. Check the platter hights, and if it mooves around free without noices.

Re: Help with 1800

hwystar — Sun, 04 Dec 2011 22:08:38 GMT

That worked.

Re: Help with 1800

hwystar — Sun, 04 Dec 2011 22:03:36 GMT

Thanks, I'll try to resize.

Re: Help with 1800

Søren Mexico — Mon, 28 Nov 2011 12:09:45 GMT

Apply new feets, check if transport screws are losened, if yes, adjust platter hight.

Reduce you pics to 640 bits horisontal length, to post, do like this.

Help with 1800

hwystar — Sun, 27 Nov 2011 18:52:51 GMT

has issues... Sits unlevel. feet missing? also platter sits so low the record scrapes the deck a bit. What's going on here? I tried to post pictures but they are too large.