https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/326341.aspxMon, 30 May 2011 20:06:36 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:326341BeoBoo0https://archivedforum.beoworld.org:443/forums/thread/326341.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=326341<p>Thanks for all the suggestions!<img src="http://forum.beoworld.org/emoticons/21.gif" alt="Yes - thumbs up" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/326308.aspxMon, 30 May 2011 12:15:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:326308Peter0https://archivedforum.beoworld.org:443/forums/thread/326308.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=326308<p>Check all three transit screws are fully undone.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/326307.aspxMon, 30 May 2011 12:07:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:326307Søren Mexico0https://archivedforum.beoworld.org:443/forums/thread/326307.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=326307<p>First thing, open the deck, clean and oil/grease all moving parts, clean the switches, check/change caps.</p> <p>There is a manul onsite for silver and gold members.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/326295.aspxMon, 30 May 2011 10:13:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:326295BeoBoo0https://archivedforum.beoworld.org:443/forums/thread/326295.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=326295<p>I recently acquired an RX on Ebay which wasn&#39;t mechanically functioning. Removing the bottom panel I found one of the wires leading to the touch control pad had seperated from its terminal, a&nbsp;simple soldering and it was good to go. It now works as supposed to except for one quirk. When pressing 33 or 45 rpm the tonearm goes to where it supposed to, drops to the record but then wants to&nbsp;return back to its starting position. Checking the arm movement there wasn&#39;t any resistance or mechanical interference, it seems gravity is pulling it back. The tonearm is properly balanced and set to 1.5g, the odd antiskating appears fixed at the factory so I didn&#39;t mess with it. A service manual for this deck would also be very helpful. <img src="http://forum.beoworld.org/emoticons/01.gif" alt="Smile" />Any help on this is most appreciated. </p><div style="clear:both;"></div>