https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/318988.aspxFri, 18 Mar 2011 13:55:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:318988Step10https://archivedforum.beoworld.org:443/forums/thread/318988.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=318988<p>Nice to get feedback, glad all is working again :)</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/318883.aspxThu, 17 Mar 2011 14:49:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:318883Skyit20https://archivedforum.beoworld.org:443/forums/thread/318883.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=318883<p class="MsoNormal" style="margin:0in 0in 0pt;"><span style="font-family:Times New Roman;font-size:small;">This was the simplest adjustment to this turntable ever, it looked more complicated than it was. Just as you said, clean piston, oil it.<span style="mso-spacerun:yes;">&nbsp; </span>10 minute repair, THANKS</span></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/318860.aspxThu, 17 Mar 2011 12:12:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:318860Skyit20https://archivedforum.beoworld.org:443/forums/thread/318860.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=318860<p>Sounds simple enough, Thanks</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/318785.aspxThu, 17 Mar 2011 06:37:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:318785Step10https://archivedforum.beoworld.org:443/forums/thread/318785.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=318785<p>Probably lack of a decent seal in the cylinder iteself. This would have originally been accomplished with some sort of hydraulic based oil I believe.</p> <p>Carefully pull the plunger out (after releasing the upper arm from pivot), give it a good clean, then use a small drop of quality sewing machine oil - not 3in1!!!</p> <p>That should sort it!</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/318741.aspxWed, 16 Mar 2011 21:48:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:318741Skyit20https://archivedforum.beoworld.org:443/forums/thread/318741.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=318741<p><span style="font-family:&#39;Verdana&#39;,&#39;sans-serif&#39;;color:black;font-size:7pt;"><span style="font-size:medium;"><span style="font-size:small;">I have (2) BG 4004 turntables and the pickup arm drops at different rates, one is perfect and the other is too fast.<span style="mso-spacerun:yes;">&nbsp; </span>I adjusted the damper cylinder screw and it is turned all the way in.<span style="mso-spacerun:yes;">&nbsp; </span>This did help but still too fast.<span style="mso-spacerun:yes;">&nbsp; </span>Is there another adjustment that would help or is the cylinder bad?<span style="mso-spacerun:yes;">&nbsp; </span>If it is bad can it be reworked?</span></span></span></p><div style="clear:both;"></div>