https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/305157.aspxWed, 15 Dec 2010 06:30:41 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:305157ben730https://archivedforum.beoworld.org:443/forums/thread/305157.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=305157<p>Thanks very much for the advice Martin. I thought that might be the case but am always cautious about forcing the issue...particularly when it is not my own system.</p> <p>Always great to have such a good resource as Beoworld members who answer even the most simple questions (and now I can look like I know what I&#39;m doing when I help him set it up!)</p> <p>&nbsp;</p> <p>Cheers mate...</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/305141.aspxWed, 15 Dec 2010 04:20:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:305141Dillen0https://archivedforum.beoworld.org:443/forums/thread/305141.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=305141<p>You need to separate the platter from the subplatter.<br />They are separate parts but will often bind to eachother.<br />Then install the subplatter, fit the belt and finally the platter.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/305129.aspxWed, 15 Dec 2010 01:38:52 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:305129ben730https://archivedforum.beoworld.org:443/forums/thread/305129.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=305129<p>Just after some advice from the experts<img src="http://forum.beoworld.org/emoticons/01.gif" alt="Smile" />...I have just helped by boss&#39;s son buy his first turntable/stereo - a beomaster/cord/gram2000 with 2 beovox X35&#39;s. &nbsp;Beautiful condition with original receipts from 1984 - would have looked great in my lounge room actually - a very nice 21st present. &nbsp;</p> <p>While &#39;fishing&#39; for the transport screws for the beogram 2000 I lifted the platter (I&#39;m more familiar with older beograms) the aluminium platter lifted off with the &#39;subplatter&#39; assembly (I hope this was supposed to happen). &nbsp;This of course meant the belt was dislodged. &nbsp;It looks like it will be quite a tricky job to replace the belt. &nbsp;I&#39;m going to help him set up the beogram in the next few days - is there an easy way to replace the belt or is the only access through the top of the beogram.</p> <p>Any advice would be welcome.</p><div style="clear:both;"></div>