BeoGram

Re: BG 3500

stotty1111 — Sat, 22 May 2010 08:02:01 GMT

Ok now sorted it

the cable has shielded white, shielded red, blue, white, black and yellow cores

The blue and white are not connected

the black is just a flying earth wire

pin 2 earth shields

pin 3 left channel - I assumed to be left channel and connected the white inner of the shielded cable

pin 5 right channel - I assumed to be right channel (right - red) and connected the red inner of the other shielded cable

pin 7 data - yellow

It does work as have tested on an Ouverture and the BG will activate via the remote play button

Have also produced a simple extension ie a 7 pin din female to 2 rca's to use with the BS4 which also works however under manual control ie finger on button

Now to give the vinyl a bending(not literally)

salut

NB thanks to all who have offered advice help with this project its taken a long time but eventually I have a achieved a system which works - unfortunately not as I wished - the BS is the master and tv the slave ideally I wanted it the other way round!

Re: BG 3500

stotty1111 — Fri, 21 May 2010 12:41:46 GMT

Yet another brilliant kidder!

I'll let you know!

salut a la quite hot and suny Finistere

Re: BG 3500

Craig — Fri, 21 May 2010 12:18:52 GMT

Tony if it does not work I will open the plug on a BG3300 I have. Ill post a picture of the inside of the plug.

Craig

Re: BG 3500

stotty1111 — Fri, 21 May 2010 11:56:29 GMT

Btilliant as ever Peter

I normally assume red right white lef tso without a test disc it works for me

the data cable yellow and the data earth is the black core however I will try it as a fly lead, then as a ground with fly attached

so based on the attached piece

i suggest the connections

pin2 shield (both cores)ground

pin3 white wrapped core left channel

pin5 red wrapped core right channel

pin7 yellow data

pin6 black data ground (maybe) will verify later!

heres hoping it all works!!

salut

Re: BG 3500

Peter — Fri, 21 May 2010 11:06:57 GMT

If you know which colour is which, look at this page. Let us know the colours for future reference!!

BG 3500

stotty1111 — Fri, 21 May 2010 09:59:40 GMT

Hi all

Trying to reinstate the 7 pin din plug on this deck lead - it had been replaceed with rca plugs

I think there should be left / right/ data and ground to the plug + a flying earth lead - the manual indicates the blue and white cores are not connected, can some kind soul give me the pin nos on the plug?

saslut

tony