BeoGram

Re: Beogram 2402

BenSA — Wed, 11 Nov 2009 01:55:36 GMT

Hi Chris

You have a PM :)

Re: Beogram 2402

Medogsfat — Tue, 10 Nov 2009 14:31:05 GMT

I've got a MMC5 with a broken cantiever somewhere if you can afford to send it to Axel for refurbishing - you're welcome to it. I know the channels were fine when I gave it to my brother before he broke it.

Chris.

Re: Beogram 2402

BenSA — Tue, 10 Nov 2009 12:29:33 GMT

Well the Beogram 2402 was sold with the BM 2400-2 as far as I know....same styling. Of course a BG4004 would be nice. I have a 4002 but wouldn't help, no datalink. My next project is to get a stylus for my BG 6500, I have never heard by BG 6500, hope it sounds good. Can't spend more on B&O at the moment :(

Re: Beogram 2402

tournedos — Tue, 10 Nov 2009 10:37:40 GMT

Excellent!

I actually have a Beogram 4004, but no BM2004-2 (I suppose this was the only Beomaster with compatible remote functions?), which annoys me. I've been thinking about a little microcontroller project that would make it work with later Datalink...

Re: Beogram 2402

BenSA — Mon, 09 Nov 2009 14:37:21 GMT

Another big thanks...as usual advice spot on. Beogram working like a charm and sounding great!! Bliss!

Re: Beogram 2402

Peter — Sun, 08 Nov 2009 15:47:37 GMT

You need a 4004 then!

Re: Beogram 2402

BenSA — Sun, 08 Nov 2009 15:02:17 GMT

Peter :

I only have 6 now! And one of those (actually a 2402!) should be going soon!

Well I actually do have some reason for my madness. I have the Beomaster 2400-2 with the remote so I couldn't pass over the Beogram 2402

Re: Beogram 2402

BenSA — Sun, 08 Nov 2009 14:58:00 GMT

Thanks for the link to the thread Mika...Very helpful!! Will have to wait till tomorrow to give it a try though......I hope I don't have a sleepless night in anticipation!! lol!!

Re: Beogram 2402

Peter — Sun, 08 Nov 2009 14:50:20 GMT

I only have 6 now! And one of those (actually a 2402!) should be going soon!

Re: Beogram 2402

tournedos — Sun, 08 Nov 2009 14:41:45 GMT

Most probably the standard issue with this type of mechanism. The lift mechanism has a small brass pin that seizes in its bushing. Search the forums, I think it was Beogram 1700 in the title of the nice thread that had an explanatory picture as well.

EDIT: it was 1902. Good luck!

BenSA:

Why I had to buy a 6th B&O turntable I'll never know!!

Because five just isn't enough?

Beogram 2402

BenSA — Sun, 08 Nov 2009 14:28:10 GMT

What to do when the arm doesn't lift or drop properly! Everything else works fine...I can't find if there is a spot that requires lubrication or not. It drops the arm pretty quickly and barely lifts the arm. Why I had to buy a 6th B&O turntable I'll never know!! Always a hair pulling experience!

Thanks in advance for any help given!