https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/221816.aspxSat, 15 Aug 2009 13:59:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221816Medogsfat0https://archivedforum.beoworld.org:443/forums/thread/221816.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=221816<p>Good stuff<img src="http://forum.beoworld.org/emoticons/21.gif" alt="Yes - thumbs up" /></p> <p>Out of interest, what is wrong with the 5005?</p> <p>Chris.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221814.aspxSat, 15 Aug 2009 13:26:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221814root0https://archivedforum.beoworld.org:443/forums/thread/221814.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=221814<p>Hi Chris!</p> <p>I soldered the jumpers on the RX2 like them on the Beogram 5005 and it works now!!!</p> <p>Thank you very much!!!!</p> <p>Marcel</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221798.aspxSat, 15 Aug 2009 10:54:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221798Medogsfat0https://archivedforum.beoworld.org:443/forums/thread/221798.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=221798<p>You can either swap the power supplies or change the &quot;jumpers&quot; on the one in the RX2 to make it compatible for 220 V.</p> <p>If you aren&#39;t sure how to change the jumpers then&nbsp;it would probably be safest to simply swap them over though and at least you know it will be set right for your power supply. The transformer&nbsp;output voltage is the same in these decks so there won&#39;t be a problem.</p> <p>Chris.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221773.aspxSat, 15 Aug 2009 06:57:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221773root0https://archivedforum.beoworld.org:443/forums/thread/221773.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=221773<p>I recently acquired one RX2 record deck, unfortunately its an us device, so it needs 110 volts.</p><p>Since I have one (220v) Beoram 5005 left for parts, I thought maybe I can use the power supply for the RX2.</p><p>It looks pretty much similar, could not find any difference when comparing these 2 power supplys.</p><p>Does anybody know if it is possible just to solder the 5005&#39;s power supply in the RX2 or if there are more things to change (then I will leave it as it is and use converter)<br /></p><div style="clear:both;"></div>