https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/185509.aspxTue, 24 Feb 2009 02:37:47 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185509Medogsfat0https://archivedforum.beoworld.org:443/forums/thread/185509.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=185509<p>Not uncommon with these, it is old and needs replacing ideally. I think member&nbsp;Craig managed to prolong the life of one of these motors (on a Beocenter 2200) by spraying it with WD40 or similar.</p> <p>No one makes a replacement motor that I&#39;m aware of but there are lots of Beograms which use the same one if you can find a broken one with a good motor.</p> <p>Chris.</p> <p>EDIT :-</p> <p>As we speak <a href="http://forum.beoworld.org/forums/t/24636.aspx">THIS</a> thread has been posted - the motors mentioned are identical to the one your Bg1800<img src="http://forum.beoworld.org/emoticons/01.gif" alt="Smile" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/185478.aspxMon, 23 Feb 2009 17:17:21 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185478Ty_Bower0https://archivedforum.beoworld.org:443/forums/thread/185478.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=185478<p>Yes, that&#39;s the one. Thanks for the tip. I&#39;ll give it a try.</p> <p>Does anyone have any ideas why the motor makes a ticking noise? Maybe there&#39;s a bump on the belt or something?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/185406.aspxMon, 23 Feb 2009 11:34:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185406Medogsfat0https://archivedforum.beoworld.org:443/forums/thread/185406.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=185406<p>If it is&nbsp;the <a href="http://www.beoworld.org/prod_details.asp?pid=275">BG1800</a> from the 1980&#39;s it will simply&nbsp;lift off.</p> <p>They can become a little stuck so you may need to &quot;rock&quot; it by lifting opposite edges alternately whilst using slight pressure in the centre. Welcome to Beoworld<img src="http://forum.beoworld.org/emoticons/01.gif" alt="Smile" /></p> <p>Chris.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/185394.aspxMon, 23 Feb 2009 10:26:31 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185394Ty_Bower0https://archivedforum.beoworld.org:443/forums/thread/185394.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=185394<p>I have a Beogram 1800. I know there are shipping locks located under the platter. How do I lift the platter to access the locks?</p><div style="clear:both;"></div>