https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/173949.aspxSun, 11 Jan 2009 17:48:13 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:173949bunb0https://archivedforum.beoworld.org:443/forums/thread/173949.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=173949How difficult is it to adjust the springs beneath the platter? Secondly, is reattaching the belt difficult?<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/173697.aspxSun, 11 Jan 2009 03:45:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:173697Peter0https://archivedforum.beoworld.org:443/forums/thread/173697.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=173697<p>I imagine the cartridge is getting a little tired which explains the first symptom. The MMC5 will be 20 years old and the suspension will be getting less compliant. This is the least well specified of the range and it will be the least successful at tracking high frequencies. </p><p>The platter just lifts off - a piece of stiff card inserted between it and the surround should enable you to lift it up. I agree that this is needlessly tricky!&nbsp;<img src="http://forum.beoworld.org/emoticons/58.gif" alt="Laughing" /> </p><p>Welcome to Beoworld. <br /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/173687.aspxSat, 10 Jan 2009 22:20:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:173687bunb0https://archivedforum.beoworld.org:443/forums/thread/173687.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=173687I&#39;m also wondering how to remove the platter so as to adjust the leaf springs?<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/173686.aspxSat, 10 Jan 2009 22:12:47 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:173686bunb0https://archivedforum.beoworld.org:443/forums/thread/173686.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=173686I&#39;ve recently acquired a sharp looking RX2. I&#39;ve set the tracking weight to 1.5 (mmc5 cartridge and stylus). However i&#39;m noticing some distortion when the stylus reaches the center of the record that&#39;s playing; higher frequencies sound washed out and static-y. It&#39;s&nbsp;noticeable&nbsp;but not drastic. Any suggestions?<div style="clear:both;"></div>