https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/158054.aspxSun, 16 Nov 2008 13:16:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:158054macjedimatt0https://archivedforum.beoworld.org:443/forums/thread/158054.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=158054That is what I suspected but wasn&#39;t sure. Thanks for your help!<br /><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/157937.aspxSun, 16 Nov 2008 06:46:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:157937Dillen0https://archivedforum.beoworld.org:443/forums/thread/157937.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=157937<p>Welcome to Beoworld !&nbsp;&nbsp; <img src="http://forum.beoworld.org/emoticons/21.gif" alt="Yes - thumbs up" /></p><p>It&#39;s a shielded lead. The outer shielding is connected to ground inside the CPU casing so should just be left isolated at the free end.</p><p>The center wire connects to the one-pin connector sitting at the extreme lower left board corner in your photo.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/157784.aspxSat, 15 Nov 2008 13:54:30 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:157784macjedimatt0https://archivedforum.beoworld.org:443/forums/thread/157784.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=157784<p>I&#39;ve just acquired a Beogram 8000 that has been sitting for several years. It seems to work pretty good aside from not having a cartridge. Upon my internal inspection I noticed some of the wiring had what looks like rat chewing damage (it was mostly taken apart already). I have been able to repair most of it but there is one wire that I can not seem to figure out where it goes. It is the blurry black wire on the left. It appears to be coaxial like the audio wires that go to the output jack. Any ideas?<br /></p><p>high res image: http://oz.plymouth.edu/~mpbedard/Beo8000wire.jpg&nbsp;</p><p><img alt="beo8000wire" height="125" src="http://oz.plymouth.edu/~mpbedard/Beo8000wire.jpg" title="beo8000wire" width="205" />&nbsp;</p><div style="clear:both;"></div>