https://archivedforum.beoworld.org:443/forums/29.aspxHave a specific BeoGram Record Deck related question? Ask here.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/143032.aspxSat, 20 Sep 2008 12:04:21 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:143032Dillen0https://archivedforum.beoworld.org:443/forums/thread/143032.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=143032<p>Good job !</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/143026.aspxSat, 20 Sep 2008 11:19:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:143026PWH0https://archivedforum.beoworld.org:443/forums/thread/143026.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=143026Bulb replaced, diapragm adjusted, its very critical, and it no works perfectly. Thank you all for your help.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/142976.aspxSat, 20 Sep 2008 06:18:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:142976Ben0https://archivedforum.beoworld.org:443/forums/thread/142976.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=142976<p>I swapped the lamp for a 3mm red&nbsp;LED and resistor. Works great, and now no more lamp to fail.</p><p>&nbsp;Cheers,</p><p>Ben</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/142969.aspxSat, 20 Sep 2008 05:16:55 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:142969PWH0https://archivedforum.beoworld.org:443/forums/thread/142969.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=142969Hi The lamp is blown, the manual is not very helpful describing &#39;housing with lamp&#39; what is the voltage rating of the lamp? will one from the speed indicators do the &nbsp;job?<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/142851.aspxFri, 19 Sep 2008 13:44:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:142851Dillen0https://archivedforum.beoworld.org:443/forums/thread/142851.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=142851<p>Exactly</p><p>- or the lamp&nbsp;has blown.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/142845.aspxFri, 19 Sep 2008 13:28:51 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:142845Mohawk0https://archivedforum.beoworld.org:443/forums/thread/142845.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=142845<p>Hi</p><p>There is a photo detector diaphragm below the tonearm that tells the deck to advance. Probably your detector will need an adjustment or the detector circuit is faulty. </p><p>/Fredrik&nbsp;</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/142832.aspxFri, 19 Sep 2008 12:19:07 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:142832PWH0https://archivedforum.beoworld.org:443/forums/thread/142832.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=29&PostID=142832<p>I have now checked this deck out and all functions work, I have cleaned, lubricated the dropping mechanism cylinder and cleaned the running rails which were squeaky. Everything works except, the record gets stuck, (I have tried several) i.e the arms are not moving across the record with the pickup dropped. It will travel to the end and back with no record and arm raised so it is not obstructed. </p><p>&nbsp;How does the deck know how much and when to advance? Surely not pressure on the stylus?? The tonearm is very easily to move up and down but quite tight side to side Where do I look? I have the service manual</p><p>&nbsp;T hanks, Peter</p><div style="clear:both;"></div>