https://archivedforum.beoworld.org:443/forums/28.aspxWith the release of Bang & Olufsen's BeoMedia, the company now offers a great solution for those wishing to integrate Bang & Olufsen products with personal computers. Discuss here!<p> enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/346886.aspxSun, 20 Nov 2011 14:45:18 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:346886guidovangool0https://archivedforum.beoworld.org:443/forums/thread/346886.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=28&PostID=346886<p>Solved...</p> <p>ilo using L.OPT - 2 to instruct the IR eye, use V.OPT - 2; Link eye transmits to Beomedia and beomedia will be set to option 2.&nbsp;</p> <p>(So setting VM - 2 in the menus doesn&#39;t change the actual option for receiving commands.&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/346791.aspxSat, 19 Nov 2011 16:25:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:346791guidovangool0https://archivedforum.beoworld.org:443/forums/thread/346791.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=28&PostID=346791<p>Hello All,</p> <p>I have a Beomedia connected to a Beovision 6-22 using a Scart connection.&nbsp;</p> <p>The Beovision 6 obviously has no PC option.&nbsp;</p> <p>I have connected an old style IR-receiver to the Beomedia (one from an old MCL-AV kit). Connected the 5V / ground / data to a 3.5mm plug.&nbsp;</p> <p>If I use a Beo4 the IR-receiver blinks shortly, so I think it receives and transmits signals.&nbsp;</p> <p>&nbsp;</p> <p>It seems the beomedia does not do anything with the signal.&nbsp;</p> <p>I tried to setup the beomedia to be able to listen to the V.AUX or V.TAPE2 commands in the setup menu. (Red - 9 - 0 - 0 - Go using a keyboard). However everytime I connect back, the options for VM and source are greyed out and set to default PC. Even when using the PC command on a Beo4, the Beomedia seems not to respond.&nbsp;</p> <p>&nbsp;</p> <p>(By the way, when the beomedia is connected to a BV7 with a ML cable, it works using a Beo4, but that&#39;s not my television... unfortunately)</p> <p>&nbsp;</p> <p>Any suggestions on settings?</p><div style="clear:both;"></div>