OK! Fixed it!

bsantini — Mon, 15 Sep 2008 17:35:55 GMT

Here's what it took:

1. Changed router for a newer model (Still used "g" bandwidth")

2. Stayed with "WEP-64 bit" encryption

3. Reset wireless card in Beomedia to "Restore defaults", then re-enbled file & printer sharing.

4. Voila! no problems with connecting any single client, MAC or otherwise.

FWIW

Barry

Re: Problems getting clients connected to BM1

bsantini — Fri, 12 Sep 2008 17:09:53 GMT

PLEASE, Anybody to help me?

Barry

Problems getting clients connected to BM1

bsantini — Mon, 01 Sep 2008 08:41:50 GMT

Hi! I've just joined as a gold member after lurking for about a year. The problem I've got is with my BV9 w/ BM1 and restoring a connection to a client. When I first set it all up with my MAC, it was no problem. Then, I experienced after a few months long periods of time where no connection to cmy MAC client could be reestablished. The, one day, it was fine for a day, and then not, which is the situation I'm in now. It good to know that I am using a wireless connection between all, with the B&O sourced wireless card.

I''ve gone through extensive troubleshooting on my own, and with BeoCare US (they're very helpful!). There are no known firewall issues. I subsequently disconnected my Mac client, and installed the client on my PC. Same error messge indicating no connection could be established. I've rechecked all BM1 settings an passwords. The only thing I see is that the WAN key screen on the BM1 will not save the key I enter (WEP128), but BM1 still connects wirelessly to the router and is on line.

Any ideas?

Thanks!

Barry

USA

Beo-PC

OK! Fixed it!

Re: Problems getting clients connected to BM1

Problems getting clients connected to BM1