BeoWorld North America

Re: Misc. Beocord Problems - 3300, 5500

Dillen — Thu, 03 Nov 2011 16:26:05 GMT

I can help you with belts and mounting instructions for your Beocord.

Martin

Re: Misc. Beocord Problems - 3300, 5500

Doug — Thu, 03 Nov 2011 15:37:11 GMT

Hi Martin, I am interested in belts for my Beocord 3300. I took it apart and the belts all need replacement. Instructions on removing the belts would be appreciated.

Please contact me at your convenience.

Thanks

Doug

Re: Misc. Beocord Problems - 3300, 5500

Wizard01 — Thu, 14 Feb 2008 17:26:41 GMT

Thanks for the info, Martin. I will work on the three units this weekend and get a better idea of what is going on. I will post back here with more details.

Thnaks again - Dwight

Re: Misc. Beocord Problems - 3300, 5500

Dillen — Wed, 13 Feb 2008 17:04:57 GMT

Welcome to Beoworld and thanks for signing up as a silver member, thereby supporting us all !

Your Beocords are in need of new belts.
The 3300 is fairly easy, I can supply the belts and mounting instructions.

If a tape is stuck in the deck, don't force anything. The instructions will tell you how to get it out without damaging neither the tape nor the deck.

The 5500 is a bit harder since more than one type of autoreverse deck was used in production.
The drawer belt should be no problem though.
In short; Remove the top cover, unscrew and lift up the large circuit
board and you will have access to the drawer motor/belt.
As a silver member you have access to service manuals and other goodies from the
download section.

Martin

Misc. Beocord Problems - 3300, 5500

Wizard01 — Wed, 13 Feb 2008 14:18:44 GMT

Hi All - I am trying to get some old Beocord units working. Here's my problems:

1) Beocord 5500 - everything works except the drawer in/out. One unit will go in slowly after a little encouragment but will not open at all. The second won't do either. Belts? Also - how do you get access to belts, etc. for replecement (how does drawer come apart)?

2) Beocord 3300 - Was working fine when stored 2 years ago. Now, unit powers up but heads & tape will not move. When pushing play or forward/rewind buttons, unit tries to do something (clicks) for a second or two, then goes back to stop.

Any help greatly appreciated.