BeoWorld North America

Re: Beogram 1800 Belt

georganic — Sun, 25 Sep 2011 16:08:04 GMT

Thanks. A poster on another site suggested another motor with another belt for the arm. I lifted the platter and sub-platter and saw a nylon gear that seemed to be stuck in nuetral. I twiddled with that and the arm moved, replaced sub-platter, platter, and...voila. Now, just waiting for the DIN/RCA adapter. Unless a B & O reciever reveals itself to me in the mean time.

Thanks again,

GJS

Re: Beogram 1800 Belt

Dillen — Sun, 25 Sep 2011 10:44:41 GMT

David,
I can supply a belt.
You have a PM (check your inbox).

Martin

Re: Beogram 1800 Belt

parkeda40 — Sun, 25 Sep 2011 07:40:17 GMT

Sorry for the delayed reply. I have been out of town for the last week. I have an 1800 with the flat belt and an mmc cartridge. Thanks for your help.

David

Re: Beogram 1800 Belt

Dillen — Sun, 25 Sep 2011 01:21:43 GMT

Welcome to Beoworld !

Sounds like the record sensor is bad - or you have no record on the platter.

Martin

Re: Beogram 1800 Belt

georganic — Sat, 24 Sep 2011 16:41:47 GMT

Maybe you can help me. I just picked up a beogram 5000 with mmc 3 cartridge Powers up fine when I press start but the tonearm doesn't move and it shuts off after 3 seconds. Same when I press "cue". I don't have the DIN (7 pin) to RCA adapter to hook up to my receiver yet. Could this be effecting tonearm?

Re: Beogram 1800 Belt

Dillen — Mon, 19 Sep 2011 13:09:43 GMT

Yep, right here.
What type of Beogram 1800 do you have ?
The early type with the SP cartridge and a round belt
or the later with the MMC cartridge and a flat belt ?

Martin

Re: Beogram 1800 Belt

Rich — Mon, 19 Sep 2011 12:16:01 GMT

Uber-member Dillen (aka Martin) likely can help. Be patient. He will probably find this thread shortly.

Beogram 1800 Belt

parkeda40 — Mon, 19 Sep 2011 07:49:51 GMT

I have a Beogram 1800 turntable that I purchased many years ago. I am trying to locate a belt for it. Does anyone here know of a source for the purchase of a new belt? Thanks.