BeoWorld North America

Re: Beocord 9000

Copperly — Thu, 10 Feb 2011 21:48:22 GMT

I really appreciate the information. Yes, the tape will wind and rewind, so the right wheel is not frozen. When you rewind, the tape counter blinks on and off with 4 small case letter c's illuminating,. Small case being only the lower half of the display ( cccc ). When you fast forward, it blinks 4 backward small case letter c's. When you stop it after a wind or rewind, the display is all 0's except the first digit is small case letter c that blinks and alternates between a and forward and backward letter c. Turn the unit off then back on and the display reads 0's.

All of the leds appear to work, as, when you press any of keypad numbers, the counter appears to display the various numbers as normal.

I also have a BC8004. Can it donor mechanical mechanisms to the BC9000.

I just turned Gold, so I will be looking at manuals

Thanks

Re: Beocord 9000

chartz — Mon, 07 Feb 2011 02:21:22 GMT

Hello,

The possibilities are many. Martin is of course right.

I've repaired four of these units, so I have seen different problems arise, and often a combination of them!

First of all, if the belts are present (!) a PSU problem can prevent the motor from being fed at all. For me, the 7915 regulator was defective.

Then, yes, the clutch (12135) will probably be bad, with a cracked bearing housing. This allow the sintered bronze bearings to slide inside the housing and this can cause many problems, because the pulley will rub on the housing hence creating a braking effect, itself the cause of a blown fuse (on some versions) or the aforementioned poor 7915 failure...

On the four Beocords I repaired it was cracked. This is fixable, but you will be careful to have the sintered bearings slightly out, I'd say by 0.2 mm.

Then many capacitors (the red ERO ones) will have to be replaced because they will be partly shorted, thus creating all sorts of strange behaviours.

The motor could of course be defective—was it noisy prior to failure?

By the way, web43 never came back to report... I find it sad that some won't bother posting when their problem is solved. That's just NOT how it works here!

Re: Beocord 9000

Dillen — Mon, 07 Feb 2011 01:20:39 GMT

Will the right reel rotate at wind/rewind ?
If not, it will need some servicing. The reels are lubricated with a thin grease, or at least
it was quite thin when applied, it dries in and hardens over the years, making the reel rotate less willingly.
It can also be a brake fault but that is rare, unless the deck was taken apart and put together the wrong way. The brake
system is not particularly easy to put together. You have to hold s couple of arms and levers in place while assembling.

I can supply new belts if needed but a frozen right reel does not necessarily mean bad belts.
The deck stops because it can't feel the tape running when the right reel is frozen, just as at tape end.

Martin

Re: Beocord 9000

Copperly — Mon, 07 Feb 2011 00:13:09 GMT

Mine starts, shuts off after a half second. The right reel never rotates, while the left will feed it tape momentarily. Do we still say that, that is belts. I was told the clutch has a broken plastic part. Looking under the cassette tray, without reoving anything, I can see nothing broken.

Re: Beocord 9000

Søren Hammer — Wed, 08 Dec 2010 12:33:23 GMT

Re: Beocord 9000

chartz — Wed, 08 Dec 2010 08:31:38 GMT

Oh shut up!

Re: Beocord 9000

Søren Hammer — Mon, 22 Nov 2010 14:51:49 GMT

Wow... that is a bargain...

I once was given a partially working Beomaster 6000 4 channel with a 40£ working Beogram 4002 with a almost unused MMC20E

Re: Beocord 9000

Doctor — Mon, 22 Nov 2010 14:39:16 GMT

There are bargains to be had. A friend bought a working Beogram 4000 with good MMC20CL for £20. But not on eBay!

Re: Beocord 9000

Søren Hammer — Mon, 22 Nov 2010 12:31:59 GMT

Hehe, I just bought a 9000 in working order, can replay but not record for 5£, and a fully restored 9000 for 50£

Re: Beocord 9000

Step1 — Mon, 22 Nov 2010 12:15:45 GMT

The reason I ask is because I was quite surprised when a non working example went for just over £100 on ebay yesterday! This included some minor scratches to the metal keypad too! There were other items by the same seller that went for a surprising amount considering the condition too. Only good deal was the CDX2 IMO which went for about £40 if I remember correctly!

@Soren I think I am moving to your country... B&O plentifully distributed round the local tips () and under-valued cassette decks / record players a-plenty

Re: Beocord 9000

Doctor — Mon, 22 Nov 2010 09:26:13 GMT

A little mean I think. The 9000 is relatively rare and is a very complex tape recorder with excellent performance. I would suggest that a perfect one could easily reach £150 and more if boxed. Extra value adding accessories would include the azimuth aligning tape and tape head cleaning set as well as the original manuals.

Re: Beocord 9000

Søren Hammer — Mon, 22 Nov 2010 08:27:37 GMT

Step1:

Can I squeeze in here and ask how much these are worth when fully working?

That depends on the market, but just around 60-90£ is my guess.

-Søren

Re: Beocord 9000

Step1 — Mon, 22 Nov 2010 06:32:23 GMT

Can I squeeze in here and ask how much these are worth when fully working?

Re: Beocord 9000

Doctor — Mon, 22 Nov 2010 01:46:32 GMT

Sounds like it needs new belts. Very common problem. Martin (Dillen on site) can supply new ones.

Beocord 9000

web43 — Sun, 21 Nov 2010 21:21:39 GMT

Hi,

Ihave a problem in that when you put the player in play mode, it starts and immediately shuts off. Does this sound like a normal service problem?

Thanks,

Bill