https://archivedforum.beoworld.org:443/forums/20.aspxThe North American market differs slightly from that in Europe. For those in Canada, Mexico and the USA, this forum will help resolve those differences and answer your questions.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/270549.aspxThu, 15 Apr 2010 10:39:01 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:270549matapan0https://archivedforum.beoworld.org:443/forums/thread/270549.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=270549<p>The door mechanism is motorized. The mechanism itself is attached to a push rod that handles the opening function.</p> <p>There are a number of potential problems that can cause this:</p> <p>1. The power supply feeding the door mechanism is burnt out.</p> <p>2. The motor handling this function is burnt out. This usually occurs when the door belt starts to slip on these units. The limit switch for the doors don&#39;t engage when they should, and the motor runs longer than it should.</p> <p>3. The motor controller board has a problem, due to #2 above.</p> <p>You should get a set of doors installed to actually test the doors under normal load. The glides will appear to function properly, but that may be just an illusion since the normal load is not on the belt and the motor.</p> <p>B&amp;O should offer preventative maintenance on this sort of thing at some reasonable cost, when units get to be about 15-20 years old. Virtually every unit out there will start failing when the door belt is stretched too far, or the limit switch is not engaged properly.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/268921.aspxWed, 07 Apr 2010 08:59:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:268921beoblok0https://archivedforum.beoworld.org:443/forums/thread/268921.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=268921<p>Hi Guy,</p> <p>Why don&#39;t you get the service manual for the 2300/2500 as you are a gold member?</p> <p>Carefully scanned by Peter... for you!</p> <p>Maurice</p> <p>&nbsp;</p> <p>Edit: And not scanned for me as I&#39;m just a bronze member <img src="http://forum.beoworld.org/emoticons/16.gif" alt="Whistle" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/268917.aspxWed, 07 Apr 2010 05:32:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:268917beoguy0https://archivedforum.beoworld.org:443/forums/thread/268917.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=268917<p><img src="http://forum.beoworld.org/emoticons/01.gif" alt="Smile" /></p> <p>&nbsp;</p> <p>Thank you Graham.&nbsp;&nbsp; Is it connected directly to the cd door, or with a belt?</p> <p>Guy</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/268894.aspxTue, 06 Apr 2010 23:38:19 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:268894joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/268894.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=268894<p>Yes, the door mechanism is operated by&nbsp;a separate motor.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/268781.aspxMon, 05 Apr 2010 17:41:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:268781beoguy0https://archivedforum.beoworld.org:443/forums/thread/268781.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=268781<p>Before I start to open the whole thing up,&nbsp; I&#39;m wondering if this is on a separate motor?&nbsp; Could it be a belt?&nbsp; The doors (if I had any) do open and close.</p> <p>Any ideas?</p> <p>Guy</p> <p>&nbsp;</p><div style="clear:both;"></div>