https://archivedforum.beoworld.org:443/forums/20.aspxThe North American market differs slightly from that in Europe. For those in Canada, Mexico and the USA, this forum will help resolve those differences and answer your questions.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/220918.aspxTue, 11 Aug 2009 01:48:17 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220918Dillen0https://archivedforum.beoworld.org:443/forums/thread/220918.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220918<p>Beoworld is a fantastic place. Full of nice and helpful people with a huge amount of knowledge to share.<br />Advice and guidance is always free, the only thing we ask is a little fee for access to&nbsp;a huge selection of manuals, catalogues and<br />other nice info in the form of a membership. Beoworld cost money to run and we are depending on members support.<br />If you prefer not&nbsp;to support Beoworld, I&nbsp;suggest you ask for further advice regarding the fault on your CD player where you<br />got the servicemanual.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/220909.aspxMon, 10 Aug 2009 17:13:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220909SolR0https://archivedforum.beoworld.org:443/forums/thread/220909.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220909<p>I located the manual and ran the diagnostics in Service Mode. I get a continuous 4 flashing. I followed the post you suggested. Does this error relate to the bad capacitor everyone keeps talking about?</p> <p>Sol</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/220747.aspxSun, 09 Aug 2009 15:32:02 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220747Peter0https://archivedforum.beoworld.org:443/forums/thread/220747.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220747<p>The service manual is on site - you need to be a silver or gold member to access these.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/220745.aspxSun, 09 Aug 2009 15:23:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220745SolR0https://archivedforum.beoworld.org:443/forums/thread/220745.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220745<p>Do you know where I can get a schematic and board layout diagram?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/220667.aspxSun, 09 Aug 2009 05:31:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220667Peter0https://archivedforum.beoworld.org:443/forums/thread/220667.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220667<p>These develop faults in the control circuitary around the laser - if you are lucky, there is a fix involving replacing a capacitor - if not, you need a new laser asembly. Have a look at <a target="_blank" href="http://forum.beoworld.org/forums/p/9684/90268.aspx#90268">this thread</a> which is most informative. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/220645.aspxSat, 08 Aug 2009 23:41:16 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:220645SolR0https://archivedforum.beoworld.org:443/forums/thread/220645.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=220645<p>My CD5500 was working fine, and as I was stepping through tracks, it stopped responding.</p> <p>When I insert a CD it spins up and stays on track 1, and then stops spinning.</p> <p>Help!</p> <p>&nbsp;</p><div style="clear:both;"></div>