BeoWorld North America

Re: Beogram 5005 help

Medogsfat — Fri, 05 Jun 2009 13:29:01 GMT

Good question.

I would apply 2 part epoxy resin (NOT the fast setting stuff which is rubbish) and then refit the platter assembly before it sets and tape it down ensuring the top platter protrudes equally all round the top plate. Just a suggestion as to how I would do it.

Chris.

Re: Beogram 5005 help

Loris — Fri, 05 Jun 2009 02:35:04 GMT

If I glue the spindle, how can I be sure that I'm gluing it perpendicular?

Re: Beogram 5005 help

Loris — Tue, 02 Jun 2009 14:23:39 GMT

Thanx Martin,

the platter was apart, but the subplatter, I guess, made the damage, beacause there was nothing under the dustcover. Anyway I shipped this beogram back. When you have the time, could you please take a look at my "new" 5005? I put a video on youtube called "5005 bearing spindle". Can you tell me how to fix it? This bearing moves too, even if much less than the previus one.

Thanx

Btw, can you look at "B&O 5005 plate" too? It shows the plate going up and down, but it's not the plate, it's the subplate that goes up and down

Re: Beogram 5005 help

Dillen — Mon, 01 Jun 2009 16:50:11 GMT

Looks like it was shipped with the heavy platter mounted. That will almost always destroy the
bottom bearing insert or even break it away from its base.

Always pack the platter separately, wrap it in bubblewrap plastics and put it under the Beogram in the box.
Lock the transport screws and cut some foam to sandwich in and fill the room under the dustcover and
to lock the arm carriage. Put a piece around (above and below) the arms as well.
Maybe we should make a How-to-ship-a-Beogram thread. Too many Beogram's gets damaged due to bad packing.

Martin

Re: Beogram 5005 help

Loris — Tue, 19 May 2009 12:19:02 GMT

Thanx for looking at the videos.

I'm lucky and the seller accepted the 5005 back and will ( hopefully :-) refund the whole amount.

I've bought another one on ebay. Hope this time I'll be more lucky:-)

Re: Beogram 5005 help

yachadm — Tue, 19 May 2009 11:58:34 GMT

You definitely have a damaged BeoGram.

From what I see (and hear), some of the plastic gears are damaged, the spindle is damaged, and the solenoid is probably also.

Martin Dillen needs to chime in here with his expertise.

If you can't do anything with it, send it to Martin in Denmark for a professional repair.

Menahem

Re: Beogram 5005 help

burantek — Wed, 29 Apr 2009 12:18:07 GMT

loris,

great idea with the videos! i think number (3) was most telling.

it appears that the spindle is displaced/damaged... (from shipping???) i will have access to my 5005 tonight and will take a further look for you...

hopefully, someone else may pop in to add further to your diagnosis!

regards,

Re: Beogram 5005 help

Loris — Tue, 28 Apr 2009 15:52:36 GMT

Well, yes the 3 screws are completely unscrewed. I've uploaded 4 videos on youtube so you can see the problem and hear the noise. They're named "broken 5005 1" ( 2,3 and 4)

http://www.youtube.com/watch?v=6sahtJyq7X4

http://www.youtube.com/watch?v=K272GnlT83s

http://www.youtube.com/watch?v=MvozCiqbni0

http://www.youtube.com/watch?v=IFAbKLOs4vY

Loris

Re: Beogram 5005 help

burantek — Tue, 28 Apr 2009 08:32:52 GMT

Loris:

Hi Jeff, you mean the mechanisms aren't free to move. Maybe. I thought I unscrew the screws completely. Tonight I'll check them and I'll try to align the weels, I have the maintenamce instructions. If it doesn't work I'll ask your help again. Thanx

Loris

not quite sure what you mean... it sounds like you may have already dealt w/ the transport screws...

if not, simply turn the (3) transport screws counterclockwise until they spin all the way "free." they will not come completely out, but just dangle there...

if you have already done that, then we'll (beoworlders) have to move on to further diagnosis.

Re: Beogram 5005 help

Loris — Tue, 28 Apr 2009 08:23:16 GMT

Hi Jeff, you mean the mechanisms aren't free to move. Maybe. I thought I unscrew the screws completely. Tonight I'll check them and I'll try to align the weels, I have the maintenamce instructions. If it doesn't work I'll ask your help again. Thanx

Loris

Re: Beogram 5005 help

burantek — Tue, 28 Apr 2009 07:26:52 GMT

have you confirmed that the (3) three transport screws have been rotated from the "transport" to "play" position?

if not, slide the beogram carefully around the edge of a table and look up at the bottom plate... use a flat head screwdriver and unlock them. they will not remove completely, just hang there...

Re: Beogram 5005 help

Loris — Mon, 27 Apr 2009 12:01:23 GMT

thanx a lot.

Loris

Re: Beogram 5005 help

birgerbum — Mon, 27 Apr 2009 11:50:40 GMT

Hi Loris

Contact Martin(Dillen) he is an expert on beograms he is a member of beoworld

regards

jan

Beogram 5005 help

Loris — Mon, 27 Apr 2009 10:26:00 GMT

Hi all,

at last the 5005 I bought on ebay arrived but it doesn't work. If I press play it makes a rattling sound, the arm goes on the record, lower, then goes up and return to his position. Seems something isn't in the right place. Any help is welcome :-)

Loris

Italy