https://archivedforum.beoworld.org:443/forums/20.aspxThe North American market differs slightly from that in Europe. For those in Canada, Mexico and the USA, this forum will help resolve those differences and answer your questions.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/154197.aspxMon, 03 Nov 2008 17:12:17 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:154197beoperson0https://archivedforum.beoworld.org:443/forums/thread/154197.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=154197I have it working with Zektor 4.1 <br />Traing Zektor to accept commands from B&amp;O remote is very straight forward. Zektor User manual should be sufficient.<br />If you are not able to find it on the web try contacting Zektor tech support - they are very helpful and will email you pdf with manuals<br /><br />Hope this helps!<br />Good luck<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/148171.aspxSun, 12 Oct 2008 07:29:16 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:148171Michael0https://archivedforum.beoworld.org:443/forums/thread/148171.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=148171<p>I can&#39;t believe nobody has responded to this yet. &nbsp;The components must be connected to the Zektor in a specific fashion. &nbsp;There is more information in these threads:</p><p>http://forum.beoworld.org/forums/thread/138545.aspx</p><p>&nbsp;</p><p>From my understanding the Zektor BS4.1 must be &#39;trained&#39; to function properly. &nbsp;I believe you need to contact Zektor to get info on how to set this up. &nbsp;I have the original Zektor and it works out of the box.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/146921.aspxMon, 06 Oct 2008 16:23:23 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:146921kengoto0https://archivedforum.beoworld.org:443/forums/thread/146921.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=20&PostID=146921Hey this may seem like a silly question but it has me stumped. I have a Beosystem 1 and I set it to use the Zektor component video switch. Everything is working through the switch but I have to change inputs on the zektor manually. I can&#39;t use the Beo4. Now what puzzles me is how by setting zektor in the beosystem inputs is it supposed to know which zektor input I would want. There is a missing link here somewhere and I&#39;m not getting it. Ideas? Thx.<div style="clear:both;"></div>