BeoWorld North America

Re: Beolab 2 - How can I turn it on to use with non B&O equipment

Russ — Tue, 01 Jul 2008 13:21:26 GMT

Absolutely correct John.

Good luck!

Russ

Re: Beolab 2 - How can I turn it on to use with non B&O equipment

bjwtpa — Tue, 01 Jul 2008 11:12:39 GMT

Thank you Russ:

I have ordered the part you suggested.

I have since learned that depending on the component output going into the Beolab 2, an item such as a Niles Audio APC-2 might also be neccessary in addition to the 0898127 to sense that the component has been turned on or off and thereby controlling Beolab 2 appropriately

John

Re: Beolab 2 - How can I turn it on to use with non B&O equipment

Russ — Tue, 01 Jul 2008 09:39:53 GMT

Hi John,

this question come up a LOT...in the US, contact your local B&O shop and order part #898127. $50 + tax & S/H. Since it is not a part made in DK by B&O, they may have to jump through an extra hoop or two to get it for you, but they're available. This gives you a dc power supply, and the connectors you need to make it work. Let me know if you have any other questions.

Russ

Beolab 2 - How can I turn it on to use with non B&O equipment

bjwtpa — Mon, 30 Jun 2008 19:37:40 GMT

Hello: What can I use to send voltage to pin #4 on the powerlink IN of my Beolab 2 to turn it on, and what is the maximum recommended voltage.

Thank you.

John