BeoWorld North America

Re: turntable troubles with Beocenter 4600

Jandyt — Tue, 13 May 2008 13:49:37 GMT

Another satisfied customer (Warm glow)

Re: turntable troubles with Beocenter 4600

troyjames — Mon, 12 May 2008 15:36:20 GMT

Ive gone through with the process you suggested and it is now working!!

theres a few smaller issues but now everything works and it sounds GREAT!

Thanks VERY much!

Re: turntable troubles with Beocenter 4600

troyjames — Sun, 11 May 2008 16:12:02 GMT

ahh alright cheers for your help

I'll have to wait till tuesday to have a look inside. or possibly tomorrow morning

I hope i can get to the part you mention as its the beocenter rather than the beogram.

But theres only one way to find out I suppose!

Thanks!

Re: turntable troubles with Beocenter 4600

Peter — Sun, 11 May 2008 16:06:38 GMT

You do put the record on the 'metal' - there is nextel painted onto it - it is perfectly safe!

Re: turntable troubles with Beocenter 4600

Jandyt — Sun, 11 May 2008 15:43:46 GMT

Yes James, the screw is supposed to be holding the arm up, it's an adjuster.
The bottom of the screw rests on a black, curved plastic piece. This piece is supposed to move up and down, but can't because of the dried up oil on the aforementioned brass pin.
I wouldn't keep trying to play records 'til you have fixed that problem.
Have you been inside yet?

Andy T.

Re: turntable troubles with Beocenter 4600

troyjames — Sun, 11 May 2008 04:59:51 GMT

just tried it again and its tending to skip towards the middle of the record

sometimes when i press the 33 button to get the arm to move over to the start of the LP the arm isnt even high enough to make it onto the record and just knocks into the side. I have a thin rubber platter cover on the turntable but i assume you dont put the record straight onto the metal anyway so this shouldnt make any difference?

also the screw that you mentioned in the other thread with the red arrow apppears to be holding the arm up. its leaning on top of it.

Thanks for all your help!

Re: turntable troubles with Beocenter 4600

troyjames — Sun, 11 May 2008 04:05:48 GMT

I'll try this on tuesday I think as thats my next day off work.

Hopefully i will be able to get to this part on the beocenter.

Im rather worried!

Re: turntable troubles with Beocenter 4600

Jandyt — Sat, 10 May 2008 18:13:03 GMT

Here you go James

LINK

The bit that will be of use is about half way through the thread.
Going to bed now, but will check this thread tomorrow to see how you're doing.
Good luck.

Andy T.

Re: turntable troubles with Beocenter 4600

troyjames — Sat, 10 May 2008 18:05:22 GMT

its based around the beogram 1500 i believe!!

I could probably be brave and have a look inside.

if you could locate that thread for me it would be excellent!!

Thank you very much.

Anyone got any other ideas? Cheers !

Re: turntable troubles with Beocenter 4600

Jandyt — Sat, 10 May 2008 17:59:56 GMT

Hi James, and welcome to Beoworld

I am not familiar with this model, but looking at the pictures, the deck looks similar to ones which regularly have this problem.
It is caused by a brass pin seizing up in it's sleeve due to dried librication. It turns into gunk.
Are you happy to go inside it?
If so, I will find the thread which explains how to fix it in a few minutes.

Andy T.

turntable troubles with Beocenter 4600

troyjames — Sat, 10 May 2008 17:47:26 GMT

recently bought my first B&O.

everythings working fine except when the arm returns across the record to the starting point it scratches across the surface of the record. Ive tried it on every counterweight setting from 0 to 2 and it still doesnt lift the stylus high enough to make it across the record without scratching it.

Any ideas?

Id be gutted if I couldnt get my first B&O working properly!

Thank you to everyone in advance.