https://archivedforum.beoworld.org:443/forums/19.aspxPour les utilisateurs francophones de BeoWorld qui voudraient parler entre eux à propos du monde de Bang et Olufsen.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/36598.aspxSat, 04 Aug 2007 06:56:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:36598Goldfrog880https://archivedforum.beoworld.org:443/forums/thread/36598.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=19&PostID=36598<p>Eric, the Masterlink signal only carries data, voltage switching (-7 to -15V on pin 11 and +7 to +15V on pin 12---down to -+3 on standby respectively) and balanced audio. The audio is on the following pins, all with&nbsp;Resistance in of 2.2M Ohms, and Resistance out of 75 Ohms at 1V balanced:</p><p>Pin 13: minus Left&nbsp;</p><p>Pin 14: plus Left &nbsp;</p><p>Pin 15: minus Right</p><p>Pin 16: plus Right</p><p>I believe that an early version of the ML cable (with four rather than three twisted groups of three) may have been designed for video, but today&#39;s ML system relies on a 75 Ohm coax connection back to the main splitter for video distribution.&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/13716.aspxTue, 15 May 2007 06:39:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:13716krec0https://archivedforum.beoworld.org:443/forums/thread/13716.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=19&PostID=13716Merci de votre r&eacute;ponse Yann,&nbsp;<div>Pas de hdmi ou de YUV, c&#39;est quand m&ecirc;me dommage :( ...</div><div><br class="khtml-block-placeholder" /></div><div><br class="khtml-block-placeholder" /></div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/13150.aspxSun, 13 May 2007 14:41:31 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:13150YannChris0https://archivedforum.beoworld.org:443/forums/thread/13150.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=19&PostID=13150<p>Bonsoir, </p><p>Le cable Masterlink ne v&eacute;hicule pas de signaux vid&eacute;o. </p><p>Il n&#39;y a que des signaux audio et des commandes de contr&ocirc;le des appareils. </p><p>Le Beocenter 2 sort un flux vid&eacute;o en RVB , S-VHS ou composite via les prises du boitier de connexion. </p><p>Yann.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/13141.aspxSun, 13 May 2007 14:24:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:13141krec0https://archivedforum.beoworld.org:443/forums/thread/13141.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=19&PostID=13141Bonjour &agrave; tous,&nbsp;<div><br class="khtml-block-placeholder" /></div><div>Je compte acquerir tr&egrave;s prochaiement un system beocenter 2, et je me demandais quelle &eacute;tait la nature du&nbsp;</div><div>signal qui transitait dans la connection masterlink ? YUV ? HDMI ? ou autre ?&nbsp;</div><div><br class="khtml-block-placeholder" /></div><div>Merci pour vos r&eacute;ponses.</div><div><br class="khtml-block-placeholder" /></div><div>Eric.</div><div style="clear:both;"></div>