https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/99700.aspxTue, 25 Mar 2008 04:29:26 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:99700stevequinn0https://archivedforum.beoworld.org:443/forums/thread/99700.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=99700Nevermind - I triple checked connections and there was a faulty solder on the data pin at the MCL 3 pin speaker plug... All working correctly now!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/99689.aspxTue, 25 Mar 2008 03:18:28 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:99689stevequinn0https://archivedforum.beoworld.org:443/forums/thread/99689.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=99689<p>Hi all, </p><p>This is my first post - after searching the wealth of info on this forum, and several hours of frustration fiddling with a new MCL setup, I hope someone may be able to help!</p><p>&nbsp;I have a BC9500 which I am hooking up with MCL2A kits in two other rooms.&nbsp; Checked and double checked all wiring, disconnected each MCL relay box in turn, and tried replacing the transceiver units (I have type 2045 and 2046).&nbsp; The only function which will work is the Mute function in each link room - I can not control the main system - volume, source, etc -&nbsp;at all from link room transceivers&nbsp;using the BL1000 (except directly in main room with the BC9500).</p><p>&nbsp;I have gone through the installation guide and troubleshooting section, measured voltages at the terminal strips (about 2.5v at the data terminals and about 8v at the dc terminal) There is a small fluctuation in voltage at the data terminals when I press a BL1000 button pointed at the transceiver which I assume is data...?</p><p>I have also tried changing the option set-up, but no luck there either!</p><p>Any advice greatly appreciated...</p><p>&nbsp;</p><p>Steve</p><p>&nbsp;</p><div style="clear:both;"></div>