General Forum

Re: beomaster 3000 1987

j0hnbarker — Sat, 05 Apr 2008 10:48:24 GMT

Edwardo:
Thanks for advice but the problem has ben solved by Solderon29 who lives quite close and has done a great job for me
Ed

A result is a result, whoever fixed it for you. Glad you got it sorted :)

Re: beomaster 3000 1987

Edwardo — Sat, 05 Apr 2008 08:39:28 GMT

Thanks for advice but the problem has ben solved by Solderon29 who lives quite close and has done a great job for me

Re: beomaster 3000 1987

j0hnbarker — Sat, 22 Mar 2008 13:26:19 GMT

Edwardo:
Hi Craig,
Thanks for comments. I tried them first but when I gave them the serial nos etc they said that they couldn't get the bits and there was no real point in their engineer coming out to look at it.
Ed

I'd try Tim Jarman if I were you Ed. I'm sure he'll be able to fix it.

John

Re: beomaster 3000 1987

Edwardo — Sat, 22 Mar 2008 11:48:54 GMT

Hi Craig,

Thanks for comments. I tried them first but when I gave them the serial nos etc they said that they couldn't get the bits and there was no real point in their engineer coming out to look at it.

Re: beomaster 3000 1987

Craig — Wed, 19 Mar 2008 12:36:49 GMT

Edwardo, the B&O dedaler in Solihull are very good at getting older equipment repaired. They don't do it on site, they send it away somewhere. Might be worth popping in a seeing them as they are local to you.

Craig

Re: beomaster 3000 1987

Edwardo — Wed, 19 Mar 2008 11:46:19 GMT

Thanks for your thoughts but as far as I know it can't be programmed and it's never happened before inthe 20 years I've owned it. I would call it a day but it's like a piece of furniture all screwed to the wall and I am loath to give up on it.

Thanks anyway

Re: beomaster 3000 1987

Edwardo — Wed, 19 Mar 2008 11:41:00 GMT

Many thanks for your help.

Looks like I shall have to take it all off the wall and maybe take a trip. I was hoping that if someone could see the problem in situe they might have a better idea of what to do.

I will try the guy you suggested.

Thanks

Re: beomaster 3000 1987

gorissek — Wed, 19 Mar 2008 06:33:38 GMT

Might be too obvious, but still. Is it possible it's programmed to play that radio program at a certain time of day or something like that?

Re: beomaster 3000 1987

j0hnbarker — Wed, 19 Mar 2008 05:47:20 GMT

Not in your direct vicinity, but I can recommend Tim Jarman highly. He is in Farnborough, and can be contacted through www.beocentral.com

Re: beomaster 3000 1987

Edwardo — Mon, 17 Mar 2008 18:27:46 GMT

I am located near solihull in West Midlands

Re: beomaster 3000 1987

j0hnbarker — Mon, 17 Mar 2008 16:32:23 GMT

Edwardo:
When my system has been switched on for more than 15 minutes, whatever it is doing, i.e. playing a CD, the system reverts to program 3 radio setting. If I switch it off it switches itself back on to progam 3 again. The only thing I can do is to remove the plug. My local dealer says they haven't got parts and it is not worth lookig at. Can anybody help please?

Edwardo - where are you located? I don't know what's wrong with your Beomaster, but there are UK based members here who would be able to service your unit for you if that is what it requires. Unfortunately many of the dealers nowadays are either unable or unwilling (or both) to repair many of the older systems. It's such a shame as virtually everything can be repaired. Let us know where you are and someone may be able to suggest someone to help.

beomaster 3000 1987

Edwardo — Mon, 17 Mar 2008 12:02:47 GMT

When my system has been switched on for more than 15 minutes, whatever it is doing, i.e. playing a CD, the system reverts to program 3 radio setting. If I switch it off it switches itself back on to progam 3 again. The only thing I can do is to remove the plug. My local dealer says they haven't got parts and it is not worth lookig at. Can anybody help please?