General Forum

Re: Com2 registration

Jandyt — Mon, 25 Feb 2008 05:17:30 GMT

Re: Com2 registration

JC — Mon, 25 Feb 2008 05:08:02 GMT

Great minds Andy. I have just finished doing just that. There was a stray handset still registered

Sorted now, thanks for your help and interest.

Jonnie

Re: Com2 registration

Jandyt — Mon, 25 Feb 2008 04:53:29 GMT

Jonnie, if I was in your situation, I would remove all handsets from the base and register them all again.
Maybe there are other handsets registered to the base. If there are more than six then it will ask you for a pin number (8 if it's the new small Beoline)
Once you've removed them, check that there aren't any more you don't have.
Let me know how youi go on, eh.

Andy T.

Re: Com2 registration

JC — Sun, 24 Feb 2008 15:11:22 GMT

Hi Andy,

It is a 2nd generation com 2. I am trying to register it to a PSTN that has 1 com2 and 3 6000s already on it.

Jonnie

Re: Com2 registration

Jandyt — Sun, 24 Feb 2008 13:55:26 GMT

The early Bc2s were stand alone, ie one handset on one base. Are you trying to register it to the same base it had before?

Andy T.

Com2 registration

JC — Sun, 24 Feb 2008 12:56:26 GMT

I am trying to register a com 2 I have had for a while in a drawer. It is fully charged and I have reset the handset. It is asking for a PIN code. I have not set a PIN for it in the past. I have tried 0000, 9999 and 1111 but all I get is 'base reg is not possible'. Any ideas welcome.

To add, the phone was working perfectly whenI was using it before.

Jonnie