General Forum

Re: AVANT 32 " VCR

Jandyt — Mon, 11 Feb 2008 15:07:39 GMT

Hi LMK
You can move the stand, but only to a pre-set position with your Beolink 1000.

Try (when in TV or Sat mode) Picture, Picture, 0 or 1 etc.
Look at the display on top of the Avant, it should say 'Stand' when Picture has been pressed the right amount of times.
Better still, get a Beo4!

Andy T.

Re: AVANT 32 " VCR

joeyboygolf — Sun, 10 Feb 2008 17:21:52 GMT

The beo4 is easiest. Just list until Stand is displayed and then use << or >> to turn the TV.

With Beolink 1000 I suggest that it is easier to use MENU SETUP to adjust stand positions.

Re: AVANT 32 " VCR

lmk — Sun, 10 Feb 2008 17:03:52 GMT

thanks for your reply Graham do you know how to use the remote to do the stand ?

Re: AVANT 32 " VCR

joeyboygolf — Sun, 10 Feb 2008 16:57:42 GMT

The beolink 1000 will work with the Avant although you will find the Beo4 much easier to use with this TV.

Din to RCA adaptors are available from B&O or more convenient/cheaper from other outlets inc. eBay. Because the Din plug has both inputs and outputs I suggest you get a Din to 4 RCA and you will be sure of getting the correct configuration even if 2 of the RCA's are redundant.

AVANT 32 " VCR

lmk — Sun, 10 Feb 2008 16:32:46 GMT

Hi could anyone help me. I've just been given a avant television but it has no remote control could anyone tell me if the beolink 1000 will work this television and will it work all the features like the motorized stand ect. Also do you know if theres a way of connection the TV to my Bose stereo system as there only seems to be din sockets on the back of the TV as a audio out but the Bose is normal phono sockets connection

Many Thanks

LMK