General Forum

Re: Beocenter 6-23 and DVI input

ridmaur — Sun, 21 Dec 2008 06:52:08 GMT

The problems I'm facing with my current BV 6-22 and Apple TV is that intermittently the BV 6-22 shows a brief blue error message saying there is no DVI input signal or incorrect format. This is just terribly annoying and sofar I have not been able to solve it. Most of the time the BV6-22 shows the Apple TV content without a problem so there doesn't seem to be anything wrong with the connection.

The other problem I faced was around HDCP; none of the movie content bought through the Apple store could be played; I circumvented that by using an expensive HDMI-DVI converter.

But the annoying blue error messages are still there. I've talked to the dealer, let them do an upgrade of the firmware, used a wide range of HDMI-DVI cables but none has solved it. I basically have given up with the thought that the BV6-22 is simply not up to the job of handing advanced technology devices like an Apple TV. Now if the BeoCenter 6-23 is better at it, I might consider an upgrade.

Re: Beocenter 6-23 and DVI input

csmager — Sat, 20 Dec 2008 04:03:00 GMT

ridmaur:
I've been told by local dealer the BV 6-23 is no longer offered by B&O; is that true?

This is what I was told. I wanted one for my bedroom (26" was too large). I would imagine most dealers would be able to find you one from somewhere. Mine had a new one in their storeroom that was available, and it was in the colour I wanted (black!). I wasn't actually intending to buy it when I went in, but he cut the price twice. Was listed as £2,900 and I got it for £2,600.

In its standard configuration, it will be the same as your BV-22. If you can persuade them to do the HD upgrade, then it should offer DVI as assignable to one of the AV connections, rather than only as PC. I'm currently using a media center pc via the PC input, and it works fine. What problems are you having? The only difference I can see the upgrade making is that you can use the STB-C to use the Beo4 to control the Apple TV.

Re: Beocenter 6-23 and DVI input

ridmaur — Sat, 20 Dec 2008 02:18:41 GMT

I've been told by local dealer the BV 6-23 is no longer offered by B&O; is that true? Otherwise I might consider upgrading the 6-22 to a 6-23 as I face numerous problems hooking my Apple TV to the DVI socket on my BV 6-22. From this conversation I gather this is primarily related to the fact that the BV 6-22 isn't really ready for hooking anything else than a PC to its DVI socket.

cheers

Rob

Re: Beocenter 6-23 and DVI input

xegoon — Fri, 12 Dec 2008 07:07:49 GMT

ridmaur:
Is an HD ready kit available for the Beovision 6-22?

No, sorry

Re: Beocenter 6-23 and DVI input

ridmaur — Fri, 12 Dec 2008 06:56:46 GMT

Is an HD ready kit available for the Beovision 6-22?

Re: Beocenter 6-23 and DVI input

csmager — Sun, 16 Nov 2008 11:31:06 GMT

I'm interested in this if possible. Mine is listed as Type 9214 - what do each of these types mean? Below the RCA Audio inputs are 3 more RCA inputs for Component, but these are covered by a piece of plastic. Does this mean anything?

How much is this 4399 kit likely to be?

At present, I have my PC connected to the DVI input and use Windows Media Center. It would be good to use the STB-C to control whatever's plugged in - which, with some bodging of Windows, should be possible.

Re: Beocenter 6-23 and DVI input

Zwets — Thu, 28 Feb 2008 07:14:01 GMT

Strange. Why are the component connections included in the upgrade then?

Re: Beocenter 6-23 and DVI input

Keith Saunders — Thu, 28 Feb 2008 05:34:21 GMT

No, sorry it is not possible..

Re: Beocenter 6-23 and DVI input

Zwets — Thu, 28 Feb 2008 04:21:11 GMT

Keith, is it also possible (if you have the HD module fitted) to recieve the HD signal through the component connectors? (3 of them I believe for the picture)

Re: Beocenter 6-23 and DVI input

Keith Saunders — Fri, 08 Feb 2008 13:06:17 GMT

Sebastien,

I understand that the kit includes the PCB 5 scaler module and an extra cable. It also includes a couple of software chips which go into sockets.

After the kit has been installed the dealer then has to update the main software from his laptop via the Masterlink socket.

Re: Beocenter 6-23 and DVI input

Sebastien — Fri, 08 Feb 2008 12:12:29 GMT

Keith:

This is exactly what I did to see the version of my Beocenter 6-23.

Could u give me more details about the "4399" kit

Re: Beocenter 6-23 and DVI input

Keith Saunders — Fri, 08 Feb 2008 11:25:14 GMT

The Type 9213 is a Mark I version which without HD upgrade and therefore can only accept a PC via the DVI

You can have an upgrade kit Type 4399 fitted which allows the DVI to be used as you want it.

To get complete details of your configuration etc, why not look in the Customer Service Menu. To get into the Customer Service Menu, press MENU on your BEO4 then move the pointer down to highlight OPTIONS then press RED then press GO.

The Customer Service menu gives you access to the following information:-

Re: Beocenter 6-23 and DVI input

Sebastien — Fri, 08 Feb 2008 11:06:51 GMT

Keith:

The details of my Beocenter 6-23 are as follows:

Type No.: 9213

AP SW 8,50

IOP SW 22,00

M2 SW 8,40

What do u think?

Re: Beocenter 6-23 and DVI input

Zwets — Fri, 08 Feb 2008 09:20:51 GMT

BarryAndrew, you have the same set a I have. You require an upgrade to recieve HD. I have been told that this is a new processor board with component connectors. I was also not happy to find out the BV6 was not HD ready as official documentation from B&O said at the time I bought mine that it would be (see below) as would most B&O tv's from 1-1-05

Products December 2004 Ja Fe Ma Ap Ma Ju Ju Au Se Ok No De Ja

BeoVision 5

BeoVision 4-65 incl. BeoSystem 2 or 1

BeoVision 4-50 incl. BeoSystem 2 or 1

BeoVision 4-42 incl. BeoSystem 2 or 1

BeoVision 4-37 incl. BeoSystem 2 or 1

BeoVision 7

BeoVision 6-26

BeoVision 6-22

“HD ready” as standard ex factory
Update possible to “HD ready”
Cannot be updated to “HD ready”

The “HD ready” update solutions implies the following elements:

A: Service solution only applicable to HDTV receivers with DVI output - implies build-in of:

DVI/HDCP module + DVI/SPDIF inderfaces + new SW

B: Build-in of DVI/HDCP or YbPr module in monitor + new SW in BeoSystem 2 and BeoSystem 1

C: Exchange scaler module + new SW

D: Exchange scaler and sound input modules + new SW

Re: Beocenter 6-23 and DVI input

BarryAndrew — Fri, 08 Feb 2008 09:01:21 GMT

Widening the thread slightly -- Is this also the case with the 6-26. I bought mine in 2005 (software 5) and was told that it could receive HD via the DVI socket. I haven't tried yet but have taken the man at his word. It was a critical point to the purchase so would be really aggrieved if I needed an upgrade.