General Forum

Re: Beocom 6000 handset problem- extreamly low volume output at the earpice.

marcpaquette — Mon, 14 Jan 2008 17:57:14 GMT

wow. you are amazing Keith. You are an asset to the community. I wish you the very best. Many thanks for your input. Very appreciated. Mp

Re: Beocom 6000 handset problem- extreamly low volume output at the earpice.

Keith Saunders — Mon, 14 Jan 2008 16:53:34 GMT

That means you have a Mark I version and the RF chip issue is quite a common issue.

However B&O make a repair kit part number 3455103 for about £50 which includes the following items:-

This will make your Mark I phone into a Mark II phone EXCEPT that it will NOT have an Earset socket but WILL still work on your Mark I chargers.

Re: Beocom 6000 handset problem- extreamly low volume output at the earpice.

marcpaquette — Mon, 14 Jan 2008 16:42:44 GMT

There is a black dot. What do you think the labour charge might be.

Re: Beocom 6000 handset problem- extreamly low volume output at the earpice.

Keith Saunders — Mon, 14 Jan 2008 03:28:09 GMT

Your problem is almost certainly caused by a faulty RF chip in the handset.

Which version of Beocom 6000 do you have ? in other words does it have a black DOT at the 9 o'clock position on the dial or the letters INT

This problem can be fixed and the cost will depend on which version you have.

Beocom 6000 handset problem- extreamly low volume output at the earpice.

marcpaquette — Sun, 13 Jan 2008 18:52:46 GMT

Strange situation, I have an extreamly low volume output at the earpiece, but only when there is someone on the other end of the line. For example, the "beeping" sound when increasing the volume by using the dial appears normal strength, but conversations are impossible. This unit was a second hand purchase to add to my existing unit. Which functions normally. I troubleshooted for a long time. De-registering, registering, swapping bases... no luck, same problem. When making a call, person at the other end is barely audible at max volume. Anyone else run into this problem?