General Forum

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 16:34:01 GMT

Next step would be to check the connections in the splitter boxes. Just to make sure none of the wires have come loose.

Craig

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 14:07:49 GMT

i once had the BS9000 right next to the Avant and both were connected by a single ML cable with all speakers on the avant , now theire is a small wall seperating them but its still the same room (on the drawing , the line showing a ML cable between the avant and the BS9000 , theire is a 4,5 to 5 foot wall about in the middle of the 2 , a 7 footer can look right over it :) )

that setup worked fine , i later expanded it.

now the TV ML cable goes in a splitter box , so does the BS9000 ML cable , and that box is connected to another splitter box which has the BL2000 en Beoport on it

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 12:48:18 GMT

patrickpeeten:
im located in belgium

Had to ask, that is a bit too far to come round and have a look. Next question(s) then, was all this equipment connected and working before? What have you changed or added to the setup?

Craig

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 12:40:54 GMT

im located in belgium

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 12:34:22 GMT

Very strange, by putting the BS9000 in option 0 and the Avant in option 2. Pressing CD on your Beo4 should make the CD play through Avant and any speakers connected to it.

Craig

P.S. Where are you located?

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 12:26:19 GMT

yep , all the lights flashed once

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 12:25:35 GMT

Patrick, did the stand by light on the Beosound flash when you set the options?

Craig

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 12:21:08 GMT

I've set the options , but the TV doesent respond to CD/Radio commands from the Beo4 , the beosound doesnt respond at all , as it should.
The beolab2000 can acces CD/radio from the beosound
But the TV or Beolab cant play Net music or Net radio from the beoport

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 12:07:48 GMT

Hope it works out.

Craig

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 12:04:29 GMT

Im ready to give it a try now , ill let you know in a few minutes

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 11:19:00 GMT

Now it will do it all automatically. Just one thing to add, make sure the units are in stand by when you set the options.

Craig

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 11:15:32 GMT

double post , srr

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 11:15:28 GMT

Ok , ill try those settings
Do you have to set which one is the default CD or radio source or is it done automaticly?

Re: AV system , need help with link options

patrickpeeten — Tue, 01 Jan 2008 11:15:27 GMT

Ok , ill try those settings
Do you have

Re: AV system , need help with link options

Craig — Tue, 01 Jan 2008 10:12:26 GMT

Hi Patrick, you need to set your BL2000 to Option 6. This is done just as I described but I think you need to use L.Opt then 6. Everything should then work as you want.

Craig