https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/63362.aspxWed, 14 Nov 2007 04:34:07 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:63362ProGram0https://archivedforum.beoworld.org:443/forums/thread/63362.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=63362Hi!You are right, my fault. It&#39;s located between inputcontrol and tone/volumecontrol, sorry. Hadn&#39;t put my glasses on.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/63355.aspxWed, 14 Nov 2007 04:04:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:63355Frank Rizzo0https://archivedforum.beoworld.org:443/forums/thread/63355.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=63355So I need a DIN with 2 ins and 2 outs...and then just hook up like an &quot;adaptor&quot; ??? Do I need to make any remote changes or will this equalize the whole signal before the internal amp and the powerlink outs??<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/63353.aspxWed, 14 Nov 2007 04:00:18 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:63353joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/63353.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=63353Unless I have misread the circuit diagram, this output is NOT volume controlled. Perhaps Keith will check.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/63342.aspxWed, 14 Nov 2007 03:02:41 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:63342ProGram0https://archivedforum.beoworld.org:443/forums/thread/63342.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=63342Hi!Your BC 9500 has a special line-in-out socket, wich is covered with a shortcircuit-cap (when not used), Only pull that off and plug in a DIN-RCA-adapter and you have the in&#39;s and out&#39;s ! (DIN pin 1 is out right, 4 is out left, 3 is in right and 5 in left). Cheers Chris Btw: this signal is volume contolled!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/63333.aspxWed, 14 Nov 2007 02:11:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:63333Frank Rizzo0https://archivedforum.beoworld.org:443/forums/thread/63333.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=63333<p>Hi...I&#39;m wanting to run an equalizer (passive ie, tape in / out) with my BC 9500....How do I do it...???</p><p>&nbsp;</p><p>What adapter plugs do I need with a RCA input and RCA output Passive EQ only..(Pioneer SG-9500).....</p><p>&nbsp;</p><p>Thanks,</p><p><br />K</p><div style="clear:both;"></div>