General Forum

Re: BeoVision 5 - dark picture

Emil — Mon, 12 Nov 2007 17:27:03 GMT

Thanks for the info Fredrik! Will probably give a call to my service technician.

Rolf - I have sent you a pm.

Regards,

Emil

Re: BeoVision 5 - dark picture

Rolf — Mon, 12 Nov 2007 16:57:14 GMT

Since I have the same issue maybe you could post the reply in this forum if you have an answer.

Tack på förhand

Rolf

Re: BeoVision 5 - dark picture

Beolab — Mon, 12 Nov 2007 16:33:20 GMT

Du har PM !!!

BeoVision 5 - dark picture

Emil — Mon, 12 Nov 2007 15:53:13 GMT

Hi,

A while ago I had to replace the chassis of my mkI BV5 due to a faulty ML contact. After this I have noticed that the picture seems much darker than before. Since the chassis replacement meant that the software was changed as well I suppose that this may have caused my problem.

I have set brightness to 50 (out of 60) but it is still hard to differ one black shade from another. All black colours just seems…black. And if I go any higher black tends to become grey.

I suspect that some of the settings in the service menu must have changed but I do not know how to access the service menu (if advisable at all) or which the factory settings should be.

Anyone who can advise how to solve this problem?

Regards,

Emil