General Forum

Re: Multi-rooms

Peter — Thu, 11 Oct 2007 14:20:08 GMT

I thought the newer sets required an amplifier for the RF out?

Re: Multi-rooms

chucky — Thu, 11 Oct 2007 13:49:23 GMT

Thanks Keith.

I thought I had only 1 RF out on my BV7. Anyway I ca'n put any more cables in so i'll split the signal.

Chucky

Re: Multi-rooms

Keith Saunders — Tue, 09 Oct 2007 02:57:17 GMT

If you wish to add an extra Beovision, you can either use another output of the B&O RF amplifier if you are using one or you can use a splitter as below:-

This ensures that impedance match to 75 ohms remains which in turn ensures quality of signal

Re: Multi-rooms

chucky — Mon, 08 Oct 2007 16:06:26 GMT

I use a ML/MCL converter as well for a passive setup. It's a bit cheaper but can do the job.

Also a question. If I run a third beovision in a linkroom do I have to split the coax running from the master in this case a BV7 (RF Modulator out)?

Thanks.

Chucky

Re: Multi-rooms

Sebastien — Mon, 08 Oct 2007 13:00:58 GMT

Can I get the link for the user manual?

Spec: http://www.beoworld.org/prod_details.asp?pid=981

S.F

Re: Multi-rooms

Keith Saunders — Mon, 08 Oct 2007 12:00:01 GMT

The Beolink passive does not need to be accessible for daily use.

Re: Multi-rooms

Sebastien — Mon, 08 Oct 2007 11:43:13 GMT

Thanks Peter. That sounds good as I am obliged to hide the speakers above the false ceiling and this case it's not worth it to use B&O speakers.

Does the Beolink Passive need to be accessible?

S.F

Re: Multi-rooms

Peter — Mon, 08 Oct 2007 11:19:23 GMT

You need Beolink Passive kits if you plan to use passive speakers. These will connect via a Masterlink cable to your system. You can use any normal speakers you like - I use B&W in one of my rooms.

The Beolink Active is for active speakers and are best suited to Beolab speakers. I dare say other makes can work but cannot advise about this.All the manuals are on site but you need to be a silver or gold member to access them. B&O do have some manuals on the official site.

Best wishes,

Multi-rooms

Sebastien — Mon, 08 Oct 2007 10:48:15 GMT

Hi,

I have a Beovision 4-50 + Beocenter 2 in the living room and I would like to connect 2 other rooms to the living room so that music can be listened in these rooms as well with the possibility to use the Beo4 in these rooms

-Can I use non B&O speakers in these rooms especially that I am thinking to hide the speakers above the false ceiling for instance?

What do I need to order from B&O in this case?

- Anybody can send me the reference books for the Beolink active and the Beolink passive?

What speakers can be connected to the BeoLink passive? to the Beolink active? Can we connect non B&O speakers to the Beolink active and the Beolink passive?

S.F