General Forum

Re: BS9000 Spins up and goes into Pause

mediabobny — Thu, 03 Jul 2008 13:37:04 GMT

A14BEO:
I don't mean to sound rude, but are you sure that you have correctly aligned the CD mechanism? It might be worth clicking through a few more calibrations to see if that makes a difference!

Just noticed this post and it's true. My Mk II BS 9000 was making scraping noises when playing CD's (but it did play them without going into 'pause'). The fix was to adjust one of the positioning screws 90 degrees from its recommended position. Hence, the optimal setting might not be the same as what the setup guide says. You've got to play around with it.

Re: BS9000 Spins up and goes into Pause

darioazul — Sun, 28 Oct 2007 14:27:39 GMT

Dear Mr. Chrishawks:

Would you please put a link to the place in Colorado where you had you item repaired?

Thank you,

Dario

Re: BS9000 Spins up and goes into Pause

chrishawks — Sun, 28 Oct 2007 12:43:27 GMT

THIS PROBLEM WAS SOLVED BY SENDING MY SYSTEM IN FOR REPAIR. THE SERVO BOARD AND LASER LENS HAD TO BE REPLACED. $250 AND IT'S WORKING PERFECTLY. THE GRAMAPHONE SHOP IN DENVER COLORADO WAS GREAT TO WORK WITH.

Re: BS9000 Spins up and goes into Pause

Keith Saunders — Tue, 09 Oct 2007 03:16:18 GMT

To clean the len use the following procedure highlighted in the manual:-

Clean the lens of the laser pen. Use a cotton bud moistened with isopropyl alcohol (polycarbonate lens cleaner), and carefully clean the lens with circular movements.

Dry the lens with the dry end of the cotton bud. Due to the shape of the lens it may be very difficult to establish whether a lens is dirty; therefore always clean the lens when a product is in for service.

Re: BS9000 Spins up and goes into Pause

joeyboygolf — Tue, 09 Oct 2007 02:51:59 GMT

chrishawks:
Does anybody know how to clean the laser lens?

Start by downloading the service manual from the site. It includes CD test instructions and dismantling procedures.

Re: BS9000 Spins up and goes into Pause

Joe — Tue, 09 Oct 2007 01:05:54 GMT

Depending on the age and use of your unit, that is probably a very temporary fix. There are "laser cleaning cds" available, not sure if they really work. You dont have much to lose at this point though. Hope it remedies your problem.

Joe

Re: BS9000 Spins up and goes into Pause

beoaus — Mon, 08 Oct 2007 21:38:07 GMT

chrishawks:
Does anybody know how to clean the laser lens?

Wish I did. B&O Service did a test on ours found it was at about 40% strength and replaced it AU$550... Ouch...[:'(][:'(]

To be fair I guess that meant the laser was on the way out...

beoaus.

Re: BS9000 Spins up and goes into Pause

chrishawks — Mon, 08 Oct 2007 20:43:06 GMT

Does anybody know how to clean the laser lens?

Re: BS9000 Spins up and goes into Pause

beoaus — Mon, 08 Oct 2007 04:42:47 GMT

There was a TIB (not sure if its called that) that details an update for BS9000 models with a similar problem that moved from vertical to flat. No idea why, mine was a MKII unit and it was easily fixed by service but it wouldn't work flat at all suffering the same problem you describe.

Could be another avenue to try.

... I wonder if there is another CD manufacturer in the world that would have to deal with the same senario..

Good luck, Beoaus.

Re: BS9000 Spins up and goes into Pause

koning — Mon, 08 Oct 2007 02:10:43 GMT

One year ago I had the same problem,but after cleaning the lens with a cleaning cd everything works fine again.

Re: BS9000 Spins up and goes into Pause

joeyboygolf — Mon, 08 Oct 2007 00:45:16 GMT

Try cleaning the laser lens. I had this problem recently and cleaning the lens fixed it.

Re: BS9000 Spins up and goes into Pause

chrishawks — Sun, 07 Oct 2007 20:31:59 GMT

Not rude at all. Yes, I've tried all the settings and re-confirmed the setting for the flat position.

Thank you.

Re: BS9000 Spins up and goes into Pause

V13WNG — Sun, 07 Oct 2007 19:55:10 GMT

I don't mean to sound rude, but are you sure that you have correctly aligned the CD mechanism? It might be worth clicking through a few more calibrations to see if that makes a difference!

Re: BS9000 Spins up and goes into Pause

chrishawks — Sun, 07 Oct 2007 19:41:46 GMT

Thank you. I've kept it clean and cleaned the tabs thoroughly, to no avail. I'm going to put a call into B&O tech support support. Coincidentally, I had an old B&O single disc system (with cassette and the sliding glass doors) and it did the exact same thing.

Re: BS9000 Spins up and goes into Pause

Joe — Sun, 07 Oct 2007 19:13:30 GMT

How old is your BS9000? Try cleaning the clear plastic tabs that stick out of the aluminum. Sometimes that can be an issue. I would suspect that your laser is going out and that moving it from the wall is coincidental. Not sure what else it would be, assuming same cds played fine before.

Joe