General Forum

Re: Problem using Beo4 with BS3200 masterlinked to BV7

mondit — Tue, 25 Sep 2007 12:11:35 GMT

Many thanks 'wtlc2zpx', and Alex - that worked great. I'll try and set a more demanding teaser for you next time...

Re: Problem using Beo4 with BS3200 masterlinked to BV7

Alex — Tue, 25 Sep 2007 11:53:48 GMT

To do this, press LIST and ST.BY at the same time, cycle up until you see OPTION? and press go, cycle until you see A.OPT? and press go, then press 0. The light on the BeoSound 3200 should flash to acknowledge this.

Re: Problem using Beo4 with BS3200 masterlinked to BV7

PhilLondon — Tue, 25 Sep 2007 10:12:58 GMT

Oh that one is simple... change the option setting back to 0 for the Beosound3200.

I suppose the speakers are on the TV.

Problem using Beo4 with BS3200 masterlinked to BV7

mondit — Tue, 25 Sep 2007 09:57:24 GMT

I've had this set-up for just over a year, but the BS3200 has just come back from repair. The problem after reconnecting everything up is that whenever I use my Beo4 remote control to change tracks on a CD or an album stored on the hard drive it'll skip from track 1-3-5-7 or from album 1-3-5-7 etc, and if I try to turn on the 'random' feature it turns it on and then off with one press of the button. So the Beo4 is obviously sending the signal twice instead of once with the BS3200, but seems to work fine when controlling the BV7.

I seem to remember the same problem shortly after setting up the system for the first time, but can't remember what I did, or more likely accidentally did, to resolve the problem.

Any help would be appreciated.