https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/67341.aspxThu, 29 Nov 2007 00:57:54 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:67341Chris0https://archivedforum.beoworld.org:443/forums/thread/67341.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=67341<p>Thanks Keith,</p><p>Will get my Tech over here to check that out... if that is the case, I will be on the hunt for a board assembly from some ones junker..</p><p>Do you know of any B&amp;O service centres in the UK that I could contact....NO ONE IN NewZealand, mention B&amp;O and they throw there hands in the air.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/48615.aspxMon, 24 Sep 2007 05:54:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:48615nobby0https://archivedforum.beoworld.org:443/forums/thread/48615.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=48615<p>Sure, I have one available.&nbsp; Or I can sell you a complete chassis for an MX7000 which you can take the necessary PCB from.</p><p>Send me a PM.</p><p>Neil</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/48609.aspxMon, 24 Sep 2007 05:28:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:48609Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/48609.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=48609If you know you need a new line output transformer, then I am assuming you have the circuit diagram. You will note on the circuit diagram that the transformer (T1) and TR33 and IC4 are all on PCB4 and the whole PCB would normally be replaced if the transformer was at fault. The reason is that when there is a transformer short circuit, the driver transistor at least will blow or be weakened.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/48601.aspxMon, 24 Sep 2007 05:06:08 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:48601Chris0https://archivedforum.beoworld.org:443/forums/thread/48601.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=48601I have a B&amp;O MX4000 that needs a replacement line Output transformer (Flyback Trans) ... all that is noted on the old one&nbsp; 3005&nbsp; &nbsp;145<div>Hoping someone can help...</div><div>Cheers John</div><div style="clear:both;"></div>