https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/46054.aspxFri, 14 Sep 2007 05:17:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:46054PhilLondon0https://archivedforum.beoworld.org:443/forums/thread/46054.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=46054<p>I just came up with an idea that I have not tested yet.</p><p>I have a lintronic box and a Beovision 7 with a STB-C.</p><p>If I have a device (let&#39;s call it device A)&nbsp;not supported by the STB-C, I can configure the Lintronic to convert Beo4 codes to the code of the new device. </p><p>It works well, but the problem is that it will not work from link room and you cannot hide the device. Also in rare case, the lintronic box may not get the signal that you have changed from a source to another and get confused.</p><p>What I am suggesting is to setup the STB-C to control a device of type B (that you choose randomly) and then place the IR blaster of the STB-C on the Lintronic, and then you program the Lintronic box to convert code from device B to device A.</p><p>Et voila, it solves all the problems!</p><p>p.</p><p>&nbsp;</p><div style="clear:both;"></div>