General Forum

Re: Beolink 7000 upgrade?

Frank Rizzo — Sun, 16 Sep 2007 13:59:04 GMT

Same here...need LCD light, mirror, glass plate and nose piece that you shoot the IR through..

Anyone??

Re: Beolink 7000 upgrade?

B&Ola — Sat, 15 Sep 2007 11:23:19 GMT

I'm lookin for a new front plate (blank alu) for my BL7000.

I have tried with my local dealer but they say it's sold out.

Does anyone know or have one extra?

/Ola

Re: Beolink 7000 upgrade?

Frank Rizzo — Sun, 26 Aug 2007 14:38:12 GMT

Gracias...Keith.....!!

Re: Beolink 7000 upgrade?

Keith Saunders — Sun, 26 Aug 2007 13:34:58 GMT

I can confirm the feedback provided by Tibor.

Re: Beolink 7000 upgrade?

Frank Rizzo — Sun, 26 Aug 2007 11:58:57 GMT

Thanks Tibor !!!!!!!!

Re: Beolink 7000 upgrade?

Tibor — Sun, 26 Aug 2007 04:05:59 GMT

Type 1633 was the MKII USA version with latest 3.1 software produced until 1996 - as far as I know.

Re: Beolink 7000 upgrade?

B&Ola — Sat, 25 Aug 2007 03:30:48 GMT

The BL 7000 I'm planning to buy is a type 1540. I think that this is a EU-version?

/Ola

Re: Beolink 7000

Frank Rizzo — Fri, 24 Aug 2007 19:04:10 GMT

Hi Mobey...it seems that if you motor it up....and set it on the table....then look at the "highest" point of the remote....it will move up approx. 1 cm or a tad less....and then you release it and it moves back down that 1 cm or less ....

Is that normal??

Gracias...

Re: Beolink 7000 upgrade?

Frank Rizzo — Fri, 24 Aug 2007 18:59:42 GMT

Hi...thanks...it says....Beolink 7000 RDS Type 1633 SW 3.1

What does that all mean?????

Re: Beolink 7000 upgrade?

cozza — Fri, 24 Aug 2007 15:45:49 GMT

The type number should be visible from underneath when the remote is folded up in table position.

To change the software requires changing one of the PCBs, and also the glass front panel as they have slightly different key layouts. It would be more cost effective to purchase another 7000 remote with RDS if you want that function.

In my opinion the RDS has limited value as it is only displayed on the blue LCD briefly when the remote is active.

Re: Beolink 7000 upgrade?

Frank Rizzo — Fri, 24 Aug 2007 14:27:47 GMT

Hey Keith.....quick question.....

Where on my Beolink 7000 does it say the Type??? I can't find that and i'd like to know what software it's running..

THanks , another Keith...

Re: Beolink 7000 upgrade?

Keith Saunders — Fri, 24 Aug 2007 14:13:13 GMT

I am guessing that you have a non EU version if you are asking this question.

What is the Type number of your Beolink 7000 ?

Re: Beolink 7000

mobeyone — Fri, 24 Aug 2007 10:30:23 GMT

There is a little bit of movement but not too much.

When you look at the remote from behind, you will see a small motor that holds it up which is quite small in comparison to the size of the remote itself.

You may get no contact coming up as nothing will be communicating with the 7000 aswell so dont panic!

Re: Beolink 7000

Frank Rizzo — Fri, 24 Aug 2007 10:20:49 GMT

Thanks Tibor....

Also,...Does a Beolink 7000...when it's in the motorized "up" position...have some "play" at the top.???? ie...it's kinda loose..???

Thanks...

Beolink 7000 upgrade?

B&Ola — Fri, 24 Aug 2007 09:28:44 GMT

Is it possible to upgrade an old Beolink 7000 to the RDS-model?

/Ola