General Forum

Re: MCP 6500 & DVD1 ??

BeoSideOfLife — Fri, 25 Apr 2008 08:01:56 GMT

True. But if the master is set to correct mode and control is all that is asked for this should work.

Re: MCP 6500 & DVD1 ??

js — Fri, 25 Apr 2008 07:45:44 GMT

BeoSideOfLife:
according to the mcp manual it is capable of controlling a video source.

Only through the audio master, MCP cannot control a video master or a video component directly

Re: MCP 6500 & DVD1 ??

BeoSideOfLife — Fri, 25 Apr 2008 07:22:59 GMT

Doesnt this depend on the tv in question? according to the mcp manual it is capable of controlling a video source.

Re: MCP 6500 & DVD1 ??

henrik — Mon, 20 Aug 2007 17:34:40 GMT

I agree with joeyboygolf, it is not a very practical solution, especially since the MCP afaik can't control the video routing in the beovision - it only controls the audio routing, meaning that you will be able to hear the DVD1 in your audio system but the tv's screen will not be turned on (unless you were already using it, that is).

Re: MCP 6500 & DVD1 ??

joeyboygolf — Mon, 20 Aug 2007 15:27:42 GMT

Not really a practical proposition in my opinion.

Re: MCP 6500 & DVD1 ??

hagan — Mon, 20 Aug 2007 14:25:06 GMT

Hi!

It is actually possible to use MCP 6500 to control the DVD1 if you have a two way TV or using the dvd through MCL link system which is two way.

If I remember correctly the tv is aux + 1, v8000 vhs is aux +2 and DVD is aux + 3 but I can be wrong with the numbers. Been a a while since I did this and I can't remember which functions that worked.

regards

Re: MCP 6500 & DVD1 ??

joeyboygolf — Mon, 20 Aug 2007 11:14:52 GMT

No. To remote control the DVD1 it has to be connected to a B&O TV and commands are routed through the TV.

The MCP will not control any TV's.

MCP 6500 & DVD1 ??

h1npw — Mon, 20 Aug 2007 10:27:43 GMT

Will a MCP 6500 control the DVD1 ?

Cheers

Nigel