General Forum

Re: MCL help required

ScottMc — Sun, 12 Aug 2007 08:57:22 GMT

thanks again everyone for your help - i will try and get some proper B&O cables from my dealer then.

Re: MCL help required

Frank Rizzo — Sat, 11 Aug 2007 11:41:17 GMT

Cool...thanks....!!

Re: MCL help required

Craig — Sat, 11 Aug 2007 11:18:28 GMT

Type 1 - Standard two pin speakers connections used for passive speakers.

Type 2 - MCL connections for use in an MCL setup.

Type3 - Speakerlink connections. Penta 1 and Penta 2 for example.

Take a look at the following links for what wires do what.

MCL

SPEAKERLINK

Craig

Re: MCL help required

joeyboygolf — Sat, 11 Aug 2007 11:09:23 GMT

Frank Rizzo:

Hi Peter,
You're above picture is what i'd really like to know the specifics on...
When is each type 1, 2 or 3 used?? What exactly do each of the 4 carry???

THanks, K

All the info is on www.beotech.co.uk specifically on this page

http://www.beoworld.org/beotech/wiring1.htm

or one very close to it.

Re: MCL help required

Frank Rizzo — Sat, 11 Aug 2007 10:59:08 GMT

Hi Peter,

You're above picture is what i'd really like to know the specifics on...

When is each type 1, 2 or 3 used?? What exactly do each of the 4 carry???

THanks, K

Re: MCL help required

Peter — Sat, 11 Aug 2007 03:44:02 GMT

I would suggest getting the B&O cable as it it has lots of shielding and seems good quality. I am afraid I gave the last of mine away literally yesterday!

Re: MCL help required

Peter — Sat, 11 Aug 2007 03:40:45 GMT

Your dealer should be able to get the plugs for you. I attach a picture. As you can see, you actually use 3 pin plugs. The right and left are important to differentiate as the third pin carries different information in each! The wiring diagrams can be found on www.Beotech.co.uk - part of this site.

MCL help required

ScottMc — Fri, 10 Aug 2007 16:22:41 GMT

hello folks - hope i'm not digging up an old topic - i did a search first but couldnt come up with the correct answers.

I have an MCL 2A unit and a Beocenter 8500, currently i'm running Redline RL45.2's from the speaker 1 socket.

the MCL 2A kit i bought only comes with the cable between the IR reciever and the wall box but not for the stretch between it and the beocenter!

I just need to know where i can get the 4 pin din connectors so i can connect up some 4 core cable between the beocenter and the MCL unit! i've looked everywhere online but can't find anywhere which will sell the correct 4 pin din connectors that i need - or do i need to use genuine B&O MCL cable? if so where can i get some from? do the dealers still stock it and is it very pricey?

also, will it affect the sound quality of my redlines - i'm planning on using CX50's in the link room and next year hope to replace the redlines with Beolab 8000's (have a bit of saving to do until then!)