https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/36160.aspxThu, 02 Aug 2007 08:29:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:36160Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/36160.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=36160<p>Whilst I have not used the balanced audio from the Masterlink cable to a third party product, it will work PROVIDED</p><ol><li>The balanced impedance of the input receiver is 2.2 Mega Ohms</li><li>The receiving power amplifier preamp can accept an audio signal of no more than +1 to -1 volt peak to peak</li></ol><p>I am not sure why you would wish to do this and if your input preamp does not correctly match the impedance of the Masterlink, then sound quality will be effected in other products on the Masterlink.</p><p>In my view, this is not something you should consider unless you fully understand about impedance matching.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/36097.aspxThu, 02 Aug 2007 03:28:43 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:36097Erik-nl0https://archivedforum.beoworld.org:443/forums/thread/36097.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=36097<p>Has anybody tried use the balanced audio signal on the ML cable to drive a set of balanced power amplifiers ?</p><p>Thanks</p><div style="clear:both;"></div>