General Forum

Re: Which Oil?

Beobuddy — Tue, 28 Feb 2012 17:04:35 GMT

Søren Mexico:

I like French kisses too., Less work and the result is pronto.

Re: Which Oil?

Beobuddy — Tue, 28 Feb 2012 17:03:14 GMT

Leslie:

Ja Andre! Een BM2400. Why?

First bought Beomaster in the early 80's.

By coincidence I bought a BM 2400-2 with remote almost in mint condition for 2-3 weeks ago. It has only one fault.

The previous (first) owner told that all the new placed fuses blown within a second, that's all.

So, if I have some spare time, I'll look at it. But with the memories in mind, it will probably be a full recap. The same as I just finished a CD5500 with faulty (shortcircuit) caps and fried resistors.

Re: Which Oil?

Søren Mexico — Tue, 28 Feb 2012 16:43:31 GMT

Wings:

Returning to the original query, thanks Chris and Soren [sorry, a horizontal line is the best I can do; can not easily re-create the diagonal line for the "o"].

I will give the Danish oil a try.

Chris, how does one "French polish"? I have not heard this phrase before. "French kissing" yes, "French polish" no.

French polish is the absolute top line of wood finishing, and have been used for hundreds of years, pianos, violins and other first class instruments are still finished this way, and yes in my opinion and as I see, Chris's too, the best way to get your wood perfect.

But as I'm lazy, and want a satin finish, I use boiled linseed oil, the problem with French polish is that you will see all nick and damages if you dont work properly. I like French kisses too., Less work and the result is pronto.

Re: Which Oil?

Leslie — Tue, 28 Feb 2012 04:11:50 GMT

Ja Andre! Een BM2400. Why?

Re: Which Oil?

Beobuddy — Tue, 28 Feb 2012 02:43:05 GMT

Leslie:

For all my wood and aluminium part I'm using "HG meubelfinish spray".

Works like magic and cost 5 euro!

@ Leslie, welke BM hangt daar boven het (theepot) vrouwtje, Een BM2400(-2)?

Re: Which Oil?

Beobuddy — Tue, 28 Feb 2012 02:40:36 GMT

Medogsfat:

The beauty of French polishing is....

With all respect and off topic, but why is it french polishing? My dad did this almost 40 years ago with the rosewood from B&O telly's back then.

Just here in The Netherlands....

Re: Which Oil?

Eugene — Mon, 27 Feb 2012 15:59:11 GMT

My polish cleaner of choice. Good for wood metal plastic and vinyl. sure put a nice restorative sheen on my BM1600 tractor belts.

Re: Which Oil?

Medogsfat — Mon, 27 Feb 2012 14:46:49 GMT

The beauty of French polishing is it really enhances the natural grain & figuring of wood & gives a tough long lasting & easy to maintain finish.

It requires stripping off any old polish & varnish back to bare wood - use the finest grit sandpaper you can get a way with, it saves effort in the long run. Some woods such as rosewood may need some staining to attain the original colour & vibrancy (B&O rosewood speakers are stained a little redder than natural rosewood, mahogany stain seems to give good results). Then apply however many coats of button (French) polish as you feel neccessary. You must apply it in the direction of the grain using single strokes and not be tempted to go over it again until you have "kocked it back" with steel wool in between each coat. French polish dries very quickly so you can repeat the process every 20 minutes or so. Button polish will fill the grain & the more open the grain of the wood, the more coats are needed - even grain filler may be needed if the grain is very open. I never use less than 4 coats depending on the wood in question. The last coat of button polish is also knocked back with steel wool & the final polish is done with beeswax. After care is much easier as you can simply use spray & wipe furniture polish.

Chris.

Re: Which Oil?

Wings — Mon, 27 Feb 2012 13:16:31 GMT

Returning to the original query, thanks Chris and Soren [sorry, a horizontal line is the best I can do; can not easily re-create the diagonal line for the "o"].

I will give the Danish oil a try.

Chris, how does one "French polish"? I have not heard this phrase before. "French kissing" yes, "French polish" no.

Re: Which Oil?

Søren Mexico — Sun, 26 Feb 2012 17:52:47 GMT

Leslie:

Søren Mexico:

Beobuddy:

This one?

Same sh1t, I use pledge even for acrylics, covers small scratches

Same ***? Are you mister magic himself. I'm having good results with this and that's a fact!

@Beobuddy, you even took the effort taking a picture to let us see were talking about the same product!

YES it is

I mean Pledge and the product you use are probably more or less the same, and yes I get good results with mine too

Re: Which Oil?

Leslie — Sun, 26 Feb 2012 17:41:56 GMT

I see, thought you wanna use that on the aluminium

Re: Which Oil?

Beobuddy — Sun, 26 Feb 2012 17:37:34 GMT

I let you know. Steel wool opens up the structure of the wooden cabinet. First use a piece of glass to take of the upper layer with dirt etc. Then use the steel wool and oil together to rub the oil in the structure.

Re: Which Oil?

Leslie — Sun, 26 Feb 2012 17:11:24 GMT

Let me know how it works with the other HG product,

Steel wool is correct and if that works?

Re: Which Oil?

Beobuddy — Sun, 26 Feb 2012 16:57:43 GMT

I've used it for the BM1001 cabinet. That worked great. But I didn't use it for aluminum. For the next BM900K is will use a different oil (also from HG), but then I also will use some steal wool. Don't know if that's the correct spelling.

Re: Which Oil?

Leslie — Sun, 26 Feb 2012 16:41:36 GMT

Søren Mexico:

Beobuddy:

This one?

Same sh1t, I use pledge even for acrylics, covers small scratches

Same ***? Are you mister magic himself. I'm having good results with this and that's a fact!

@Beobuddy, you even took the effort taking a picture to let us see were talking about the same product!

YES it is